Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ia/1AACV00172
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 09, 10, 11, 12, 13, 14 Chevy Traverse
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oND/1AXAA00013
• Pry Bar http://1aau.to/od5/1AXAA00020
• 13mm Wrench http://1aau.to/oh5/1AXAA00010
• 21mm wrench
• 22mm Wrench
• 10mm Socket http://1aau.to/oBq/1AXAA00017
• 13mm Socket http://1aau.to/oGb/1AXAA00015
• 21mm Socket http://1aau.to/ojw/1AXAA00043
• 22mm Socket http://1aau.to/oa3/1AXAA00266
• 24mm Socket
• 34mm Socket http://1aau.to/oo/1AAST00004
• Dead Blow Hammer http://1aau.to/ogd/1AXAA00091
• Ratchet http://1aau.to/oPm/1AXAA00016
• Socket Extensions http://1aau.to/oGb/1AXAA00015
• Torque Wrench http://1aau.to/ona/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Floor Jack http://1aau.to/okj/1AXAA00068
• Hammer http://1aau.to/ogd/1AXAA00091
• Jack Stands http://1aau.to/okj/1AXAA00065
For More Info visit us at http://1aau.to/h/asc/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great video! Thank you.
Do you have to re-align the vehicle afterwards? I'm pretty sure the answer is no but I'm hoping some more experienced mechanics can confirm this.
Very great video. Concise, well done, and thorough. The only thing I didn't like was having to re-use the metal washer. Why can't the new axle shaft just come with it on there? Also if it were mine I would have absolutely wiped the rust off it at a minimum.
One of the best repair videos I've seen. Straight to the point, easy to follow, and good angles.
Will this be the same process and parts for the 212 Buick Enclave?
Same as a 2015? Or? I can’t find a video for that year
What to do when the cv axle is frozes up in the hub. Been soaking it in pb blaster for 2 days. Cant budge the axle out of the hub.
Where is transmission fluid?
Are there any major differences between the drivers side and passenger side cv axles? I watched both videos on your channel for this same car but on the drivers side.
Loved the video. Very good quality as well.
Could you take the Axle nut off before you lift the car up or at least break the nut loose while the vehicle is still on the ground? That's what I do with the Wheel Lug nuts when I start anything in those areas.
the seal is leaking, must be replaced
Do you need a Wheel alignment after doing this repair?
I think he forgot to use loctite 242 for vibration it looks pretty clear applied on the bolts thread
Will this procedure apply for a equinox 2005?
In a perfect world…but what if you have a stuck spindle?
Why not put new washers on the new parts
This same as a 2010 equinox LT v6 3.0 awd
use an impact gun
Is this the same process for a 2014 GMC terrain?
Do you if you can get it off by disconnecting just the lower ball joint & tie rod? I already changed the struts last year and I don't want to lose my alignment.
I dk why I love the breaker bar when someone breaks loose a tight torqued nut.. that sound too when he broke loose the axel nut but like the 32mm nut so awesome
very painful to watch
How far flush does it go back
I forgot the metal washer would it afrcted?
My boots are good and no grease leaking, but I’m getting a faint clicking from the left side as I coast around a right hand turn. The right just started the same thing. I’m also getting a wheel shake at various speeds, but have had the wheels balanced twice. Would replacing the axles fix this?
is the same on a 2011 chevy impla LT
What are some known symptoms that will occur to know these need to be changed? I have a 2014 AWD that’s giving me a little shake from 2-3 gear. Any info is appreciated.
Will u be able to do a video on this for a 2010 pontiac g6 .u have everything else but this