Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ia/1AACV00084
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, Chevy, Silverado
🔧 List of tools used:
• Pry Bar http://1aau.to/oaD/1AXAA00020
• 15mm Socket http://1aau.to/oit/1AXAA00015
• 22mm Socket http://1aau.to/oL/1AXAA00266
• 35mm Socket http://1aau.to/oi/1AAST00005
• 1/2 Inch Breaker Bar http://1aau.to/oaV/1AXAA00078
• Ratchet http://1aau.to/okI/1AXAA00016
• Socket Extensions http://1aau.to/oit/1AXAA00015
• Torque Wrench http://1aau.to/oda/1AXAA00044
For More Info visit us at http://1aau.to/h/bCB/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Anyone else notice the strut magical was back in?? And not shown
Hey what torque wrench brand is that you are using?
You don't ever say that you took the strutt out before you take the the cv shaft out .and it takes a 36mm socket for the axle nut.
Yall forgot to include how you took out the strut. Cant take the axle out without removing the strut.
Thanks for the video. I have a 2017 Silverado and it is a 36mm nut on the end of my axle. Everything else was the same.
Two things: Answer the questions in the comments. And why did you replace that CV shaft? Boots weren't even torn.
explain that the strut was taken off the the CV shaft this video is misleading
I just noticed on this video, 1A Auto is doing the job on a truck with the strut already removed. You can not do this with the strut in place. I just did this job on my Escalade EXT on both sides. Trick is to loosen all three strut nuts on the mount under the hood. Back the nuts off so just a few threads are holding them. Then remove the bolts that attach the strut to the bottom A arm. Now you will have the ability to shift the strut back and allow it to drop in the A arm giving you plenty of space to get the axle out. No worries on the load on the strut. It will not spring out. Very easy to put it back in place. I did the driver side first and it took me 3 hours just because I was trying to avoid messing with the strut. The passenger side took me less than an hour.
does the strut have to come out in order to take out the cv axle out?