How To Install Replace Remove Door Panel Chevy S10 and GMC S15 99-04 1AAuto.com

How To Install Replace Remove Door Panel Chevy S10 and GMC S15 99-04 1AAuto.com

http://www.1aauto.com 1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number…

135
Like
Save


Comments

Jeffrey Gee says:

Oh and the switches for power windows, locks etc… Use two screwdrivers,
the lock switch was difficult. Pry tabs inward with one screwdriver and pry
up gently on bottom of connectors with other screwdriver…

charlot masturd says:

what type of window crank removal tool are you using?

1A Auto Parts says:

You can use several different methods. There are some people that are able
to do it with a clean rag and pop out the C-clip. You can also us a forked
thin flat pry bar to release the clip as well.

rodycussell says:

This video is awesome and very helpful. Thanks!

Nmatenum420 says:

thank you very very helpful got the door panel off with no prob. replaced
my mirrors and speakers. saved close to 150$ labor by doing it myself.

onefatalerror says:

Thanks man, Was having trouble finding tho’s Screws under the arm rest.

roastedtiress10 says:

thank you for the help

Anthony Barnes says:

i need a door panel …the idiot that installed my door speakers broke my
door armrest handle .. ( the plastic where the two screws hold the door
panel) and screwed up several of the plastic clips..ive searched ebay…no
one has these door panels in my year and color…is there another way to
possibly repair these ???

1A Auto Parts says:

@abarnes0330 You could try Craigs List or possibly your local junk yard. If
you need some of the hard to find plastic door panel retainers, your local
dealer could probably get them for you. Hope this helps you out.

HitHardProductions22 says:

Is this the same setup as a 2003 s-10 I’m thinking about changing my door
speakers.

pupsterX says:

Thank you! Had to replace the driver side mirror on my ’98 S10, followed
your instructions for removing the door panel, and had the job done in less
than half an hour. I’m a complete novice. I used the paper clip method for
the window handle, took a few tries and expletives, but once I got on the
handle clip, it came right off. Awesome video!

TheBpw6788 says:

so say i have a 1993 chevy s10 pickup 5 speed can i do this to my truck to
get the door panel out?

ecboricua87 says:

thanks for the vids saved me more then once

1A Auto Parts says:

@ecboricua87 Thank you for checking us out.Have a great day!

TheBpw6788 says:

@1aauto thank you very much

BigDave washere says:

I want to sell my 1986 GMC S15 ext.cab, it runs good has the same motor
that came with truck never been rebuilt,but it needs work on the inside
cab,i had the transmission rebuilt about 4 years ago,shocks replaced,I’m
going to put a pic. on youtube and see what i can sell it for,plus it has
never been wrecked,

David Peterson says:

i did not see how you use the paperclips that is the only hard part of this
job most people don’t have the proper tool and i’m one of them LOL

1A Auto Parts says:

@TweekinE This door lock actuator repair vehicle will show you how to
remove the door panel on the tailgate of your 2001 GMC Jimmy. Hope this
helps you out.
youtube.com/watch?v=flwRrsSMivQ&feature=plcp&context=C366727dUDOEgsToPDskJ5Gskope7oxtQs1H5mZmNk

BlackSeranna says:

Thank you soooo much! Life saver!

cmss1992 says:

where is the video you mentioned thats more detailed in taking the window
crank off with paper clips?

TweekinE says:

I have an 01 GMC jimmy 2 door do you know how to get the back panel off so
I can get to the back speakers?

James Webster says:

excellent thanks

1A Auto Parts says:

@jordan22828 If they are just turning try pulling on the panel in the area
of the screw to help them come out. If you have stripped the head then
drill off the head to remove the panel. Then use pliers or vise-grips to
remove the rest of the screw.

1A Auto Parts says:

@TheBpw6788 Your 93 S10 is a different platform, however most of the basics
should be the same. You will need to remove all of the trim pieces and then
pry the door panel away from the door. There should be some push pin clips
on the backside of the door panel that hold it to the door. Hope this
helps. 1aauto.com

speacock2 says:

where is the paper clip method vidoe mentioned earlier in this video?

1A Auto Parts says:

@cmss1992 Here’s a link to it for you
youtube.com/user/1aauto?feature=mhee#p/search/47/dnmPVf4KNcw

1A Auto Parts says:

@speacock2 Here’s a link to the video that shows you how to remove the
window crank handle using a paper clip.
youtube.com/user/1aauto?feature=mhee#p/search/0/dnmPVf4KNcw

1A Auto Parts says:

@pupsterX Thank you for checking out our YouTube, auto repair video.

atomkinder67 says:

Thanks! This helped me greatly when my window came out of its track on my
2001 S10 and wouldn’t raise or lower anymore. It’ll likely happen again,
and then I’ll know what to do if it does!

bill glockman says:

@abarnes0330 what color are you looking for and where are you. try a scrap
yard. where i got most my interior parts

jordan22828 says:

what if the screws stay in the door,do you remove them and get new ones or
just force it ?

Write a comment