https://www.1aauto.com/pitman-arm/i/1aspa00009?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=BgQLOOwffj0
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged pitman arm. This video is applicable to the 02, 03, 04, 05, 06 Chevy Avalanche
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ASFK02075
1ASFK02245
1ASPA00009
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Pry Bar
• Complete Metric Socket Set
• 2 Jaw Gear Puller
• Acetylene torch
• Grease Gun
• Pickle Fork
• Ratchet
• Socket Extensions
🔧 Instructions:
1. Removing the Pitman Arm 0:29
2. Installing the Pitman Arm 6:00
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
At 2:25, you can see the pitman arm puller being used. But at 2:37, a different style tool is being used. Why the change in tool?
Is this the same process for a 2001 chevy tahoe?
My nut was 33mm
Thanks for the tutorial. Very helpful. There's was a rubber seal on mine that had to be pushed up into the gearbox with a flathead so the puller would fit. Also had to take the skid plate off to get a good angle on that 34mm. Thanks 1aauto.
great video
How many splines does it have on a 05 Chevy 1500?
I have a question when you replace the pitman control arm you need to have the steering wheel lock???
Is this the same for a 2000 Silverado? And is there another way to grease it up without the gun?
Cool trick with the wrench and bolt!
Great Video, are you afraid of seal damage when heating it up?