http://www.1aauto.com/1A/HeadLights/Chevy/Malibu/1ALHP00356 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fa…
http://www.1aauto.com/1A/HeadLights/Chevy/Malibu/1ALHP00356 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fa…
You must be logged in to post a comment.
We currently do not have an auto repair video that covers this particular
repair.1aauto.com 888-844-3393
do you have a video for replacing the front bumper cover on an 07 malibu lt?
If you changed the headlight and the old one was loose like that, there may
be a small tab or something that helps to secure that light that’s damaged.
Sometimes it takes a little effort to get those clips to snap in correctly
too.
You made this so simple. Thanks dude!!
I have a an 08 Malibu, and you have to take the half of the front end off
to change the headlight bulbs!!
Try to wiggle the adjusting screw a little bit as you turn it. Sometimes
they get stuck a litle bit. 1aauto.com 888-844-3393
Thank you:)
I echo Jon Rose-clear explanation, easy to understand an to do-replaced a
bulb this AM and have the backup for when the other one goes! Thanks!
my moms chevy malibu driver side headlight beam is low we tried to adjust
with the screw on top but it doesnt move the other side move the beam up
and down.what else can we do to adjust light beam.thanks
You’re welcome. Glad we were able to help you out. Have a great day
1aauto.com 888-844-3393
Thanks for watching. Have a great day! 1aauto.com
If there’s enough room you might be able to reach behind the headlights and
remove the bulb. 1aauto.com 888-844-3393
absolutely flawless instruction, even for one as mechanically challenged as
it. you can be sure, I’ll be going with 1aauto.com for my online orders.
I got a issue with my left directional light at first it thought it was
just a bulb.I replaced the bulb and the light still dont work.i’m hearing
it could be a bad socket .How do you replace a bad directional light socket
?
Thanks for this! Just knowing I need the 10mm probably saved me five
minutes!
To replace a socket you will have to cut into the wiring harness for the
bulb and replace it with a new one. You can normally find them at your
local part store or even the dealer.
Hey i have a 06 malibu, same setup for the headlight assembly but my
passenger side headlight for some reason even when tightened up and the
little plastic clips are inside the metal holes lined up, the assembly
still moves up and down a little bit causing my headlight to wobble while
i’m driving. I thought it could be weather stripping or a broken retainer
clip but nothing is broken, any ideas? Thanks!