http://www.1aauto.com/1A/alternator/GMC/C1500-Truck/1AEAL00005 1A Auto shows you how to repair, install, fix, change or replace a broken or bad alternator in…
How To Install Replace Alternator Chevy Silverado Pickup Truck Suburban and Tahoe 1AAuto.com
76
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Thanks for the ratchet on tensioner tip! After failing with several other items I turned to YouTUbe and you.
If it hasn’t been tuned up in a while, you may want to start with a simple tune up.
You may want to see if there is a stored code in the computer that may tell you what the issue is.
Simple question, My truck battery icon all of a sudden came on. AZ and Orel test ed and said alternator good, battery good. Reinstall same thing happens any suggestions.
I have a 2003 Chevy Surburban. When I put it in drive, it tends to want to cut off. Could it be the alternator or something else? I put a new battery in.
Great video, walked me through the whole job. Had you right there in the garage. Many thanks.
A no start is something that will be difficult to diagnose but I recommend bringing the truck to someone before you start throwing parts at a problem.
I have 1997 chevy suburban wont work on all light and start too!! I put new battery still wont work? point alternator?
If there’s a check engine light on in the dash you may want to pull the code to see what could be causing the issue.
my 92 chevy silverado 1500 has a problem when I put it in gear it will shut off I have put a new fuel pump on it and several sensors still doing the same please help me out
It should be a 3/8 drive ratchet. Hope this helps you out. 1aauto.com 888-844-3393
what rachet set did u use to relieve that tension pulley
What a great video! This will save me some dough.
You may want to refer to your owners manual to see what they recommend.
Hi I have a Chevrolet Work Truck 1998 c1500 and I want to know ¿What type of battery do I need? I mean how many amps? Greetings and thanks.
Informative – Thanks for sharing
There may be a loose wire or loose ground somewhere. Also check the switch and the fuses to see if they are okay.
hi man, do you know something about my problem(crazy dashboard/ lights flicking etc), its a chevy silverado, check out my video please . thanks for your time!
awesome video, saved me some dough!
Big help thanks Man!
Sometimes you have to wiggle the alternator around a bit as you turn the bolt.
How do You align the bolts to the alternator – I have been trying and trying.
I’m not 100% sure. I’m not aware of or have seen anyone make this kind of a swap. You may want to check out an automotive forum for your vehicle to see if there’s someone out there that has done this. They may be able to tell you exactly what you would need.
wonderin if a duramax diesel motor would fit in a 98 K2500 chasis??? Has a 5.7 350 in it now… If it works, how easy or hard to do?
THANK A LOT I DIDNT HAVE A CLUE HOW TO DO THIS…BIG HELP MAN..
Awesome video. Just changed out the alternator on my 2003 Silverado. Instructions were perfect. Thanks!
Great video!! Very helpful.
Fantastic video. I canceled my appt at the mechanic after watching this and decided to try it on my own. The worst issue I had was getting the bolt holes lined up. 30 minutes later and I was done. Great service to the common man you provide.
i’m mechanically inclined enough to get me around in little situations. i thought changing an altenator was more complicated than this. thank you so much for this video. keep them coming.
Excellent video, thanks!!! You saved me a ton of time, I probably would’ve broken that stud had I not heard the need for 2 wrenches… Thanks!
What a great video!! Thanks a million!! Step by Step exactly as I needed to do on my Chevy Silverado 1500 with the Vortec V-8 motor.
Now if you would do a Replacing Power Steering Pump on the same motor I would be set. Many videos and instructions but not for my style assembly and no where as clear of instructions as you do. Again Thanks for the long distance help!!