please like this video 🙂
Facebook: http://www.facebook.com/Ghostlyrich
Twitter: https://twitter.com/ghostlyrich
This vehicle is pretty easy for installing a alarm in once you get it started and defiantly easy to put a remote start in i highly suggest you double check wires as you never know but i hope this helps you with your install on your chevy tahoe the alarm in video was a compustar with artic start remotes also this defiantly is a good idea because of the the built in immobilizer
){kind=link}
At 15:22 you use the key fob to unlock the vehicle but you don't wire the keyless entry until 21:00. Am I missing something?
Where did you run ur relay for the starter the Engine lock relay
I’m learning how to do my own alarm in my 96 I’m nervous lol
Hey Buddy Cheers from British Columbia Canada… Nice video but I have a question about removing this system …
Can I just cut the power to my command start ? I don't want to use it anymore and just need to know if removing the power wire is enough or would I have to completely remove the entire command start ? Thanks it's Wednesday May 5th 2021…
Have a 1998 chevy silverado. Im not sure how or why you had to hook up the relay. I got mine to work but it throws engine codes and starter screetches and its shifting funny. I have no clue wat happend it started a couple of times just fine but now its problems. I just disconnected it and back to the drawing board. Oh yes sum times it just cranks n cranks but doesnt start. Any ideas? Thanx.
What makes this wiring any different from a 94-93-92 c1500 truck or SUV.
I need a tutorial for my 94 ,but I feel like the wiring colors and location would be the same, but the interior and dash did change in 1995 forward
I was told keyless entry wiring is behind kick pod pre 95 . Did you wire in keyless through the column?
Can u explain what the “second starter” wire is all about? Thanks! Great vid.
What if i want to remove the auto start.
Fuck everyone in her trying to install this and the truck I have has this and I want it gone
Tryin to hook up a viper 5305v alarm remote start on my 1998 chevy truck but you lost me with the relays. Can you help?
I had my viper alarm system installed like 2 weeks ago and now every time my key goes back from the off position the truck tries to crank over, but never turns on just a constant crank noise.
How manny relays do i need
Your video sucks
I swear got a 1994 Chevy and it turns out old owner wired one of these alarms into my truck and wired the door lock into it but what a surprise they gave up and didn’t power the alarm so the fix was so simple and I didn’t know it was there for years
The way he’s got it if you hit the dome over ride the alarm won’t work
Does this work for 99 suburban?
Will this work if it different car and different car alarm?
What wires are going into and coming out of the first relay you set up? The ignition ones.
So i would like to install a remote start into my 1996 Tahoe and was wondering what wires do i need to put relays or anything of the sort onto? Thanks!