1A Auto shows you how to repair, install, fix, change or replace a worn out or screeching front wheel hub. This video is applicable to the 00, 01, 02, 03, 04, 05, 06 Chevy Silverado
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oaF/1AXAA00013
• 15mm Wrench http://1aau.to/op/1AXAA00010
• 18mm Socket http://1aau.to/ow/1AXAA00043
• 22mm Socket http://1aau.to/oc/1AXAA00266
• 35mm Socket http://1aau.to/oa/1AAST00005
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• T55 Torx Socket
• 1/2 Inch Breaker Bar http://1aau.to/oj/1AXAA00078
• Ratchet http://1aau.to/oau/1AXAA00016
• Torque Wrench http://1aau.to/oC/1AXAA00044
• 5mm Hex Wrench
• Floor Jack http://1aau.to/ow/1AXAA00068
• Hammer http://1aau.to/oo/1AXAA00091
• Jack Stands http://1aau.to/oz/1AXAA00065
• Large C-Clamp
For More Info visit us at http://1aau.to/h/bk/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Never seen such clean hands doing that job
Why take the brake pads off if you take the caliper off
15mm won't budge is a wrench better then a sockets?
Purchased new wheel hubs, but splines do not go on to axle…same number of splines.
To remove the axle nut, you can also put it in 4wd. You need to have the key on so the actuator engages.
Is it a 35mm or 36mm? Your tool list for the video says a 35mm but I bought the bearing package that comes with a 36mm… Delivery isn't until Wednesday but I'm trying to get all my tools together today.
Where does this rusty vehicle live? Maybe it would be good to change the cv shafts as well while your at it?