K&N has designed a performance air intake system for the 2005, 2006, 2007, 2008, 2009 and 2010 Chevrolet (Chevy) Cobalt 2.2L. K&N dynamometer tests show an estimated 6.6 horsepower gain at…
K&N has designed a performance air intake system for the 2005, 2006, 2007, 2008, 2009 and 2010 Chevrolet (Chevy) Cobalt 2.2L. K&N dynamometer tests show an estimated 6.6 horsepower gain at…
You must be logged in to post a comment.
So i take it u guys left the snorkel part or whatever its called in. U can
see it when u take your pass headlight out. If it can stay in it saves me a
little headache
“With the provided hardware.”
I have a 2006 Chevy Cobalt and I’m pretty sure I have a faulty EGR Valve.
Can anyone tell/show me where to find that on the engine itself.
Even though it’s for a cobalt I had to modify the hoses and it seemed like
it wasn’t long enough, very sketchy like fit
This kit is a Typhoon system and is for the ’09 Cobalt 2.2L. Do you have
the 2.2L or the 2.0L engine? The system is different if you have the 2.0L.
This kit featured in the video is a short ram style system with a heat
shield.
Man that sounded way better with the k&n installed. But I’m like the
comment b4 me. Will my check engine light come on?
Am I going to get any check engine codes with the air intake?
itl fit but knn cant tell u to do it but it will
yes it is in fact the 2.4L cause it has the ss bumpers and ss 17″ wheels.
it does NOT have the ss lip from the supercharged models. this may actually
be a sport model
No CEL will happen with our kit. All of our kits are tuned to work with
stock programming of the vehicle. If you were to experience a CEL
(Extremely rare situation) we ask that you contact us immediately so we can
correct the concern.
Please contact our Customer Support Team at 800-858-3333 so we can resolve
this for you.
It’s similar, but the kit you need is 69-4517TTK. This kit only fits the
’06-’09 models.
In theory, it can better economy. But as it is not possible to test for, we
do not claim or guarantee it.
My maf cor won’t reach the maf any ideas
How much faster would your car go with this installation? And how much does
the new system cost?
Is it pretty much the same procedure with the 2.4L NA engine in the cobalt
sedan sport? Or do you not make a CAI for it?
The filter is held on by a hose clamp. You must loosen the clamp to remove
the filter.
I do not show any errors with the tube or the fitment of this kit. It is
possible that some consumers attempted to fit it to the 2.0L, in which
case, it would not fit correctly. If you have any install concerns, we ask
you please contact our Tech line so we can resolve it for you.
So Easy.. Plus all that extra HP!!!
there is a L wrench screw were the stock air box is at to pain in the ass
to get to
Unfortunately, we do not list an intake system for your application and
cannot recommend installing this kit to it.
05-08 LS/LT = L61 2.2 w/o VVT 09-10 LS/LT = LAP 2.2 w/ VVT SS/NA = LE5 2.4
w/ VVT It says VVT on the valve cover if you’d like to check.
Is the only benifit an addition to horse power or will cold air intake
affect the cars fuel milage?
is this the K&N 69 Series Typhoon Intake Systems and will this fit my
cobalt 09 lt 4cyl please answer so i can know if this is what i should
buy…thanks also is this a cold air intake
i have a 2007 cobalt coupe ls 2.2 liter i have a cold air intake installed
on it. how do i change the filter on the cold air intake? can you make a
video or just tell me?
@UYNProductions Not to mention, the motor has coil on plug ignition,
whereas the 2.2 used a distributor.
Provided hardware, provided hardware lol
@UYNProductions Correct, the 2.2 did not have VVT (atleast I know of in 05
through 07). However, it is really hard to tell whether or not that is a
2.4, or a 2.2, as intakes made would fit either or. Not to mention, the car
does have a stock SS front bumper, however you can get that on a LS/LT…
The only “hint” that it is a 2.2, was the air pump, HOWEVER, on the actual
air box they removed did not have the air pump. My money bets this was a 2.4
All 2005-2010 Cobalt 2.2L are DOHC.
yes mine is the 2.2l iam gonna order here shortly also my question is did
they fix the errors with the tube fitting ect i seen great reviews but the
negative reviews i did see shown errors with the tube fitting and the
clamps k&n items are great as of right now iam using the k&n intake filter
and i love it..
Would this fit a 2006 saturn ion 2.2L ?
The vehicle will still have the same top speed (this is controlled by your
governor which is not changed). The price of the system will vary depending
on where you purchase it; we recommend shopping around for the best price.
dohc engine ?
i just got this intake an installed it to my cobalt 2.2l now my engine
light is on i went to a shop and its reading p0102 which is my air sensor
how do i fix this???
Would this fit on a 2.4 pontiac g5 gt. The engines intake is exactly the
same
We do not recommend using this kit on your application; there could be
different mounting points or cause a check engine light, etc.
it is the 2.2 ecotech yes it is an 05 it is the same car as mine 😀
@UYNProductions
how much would a cheaper version cost
if that really is a 2005, then that is not the 2.2 motor. in 2005 the only
motor with vvt was the le5 2.4 from the N/A SS.