This is a step by step in how to install a radio in a Silverado Follow me on Facebook http://www.facebook.com/profile.php?id=100002404806381.
This is a step by step in how to install a radio in a Silverado Follow me on Facebook http://www.facebook.com/profile.php?id=100002404806381.
You must be logged in to post a comment.
Hi Frisco, I have an ’01 GMC Sierra, the previous owner has tried to
hardwire a pioneer in. Long story short I have no dash lights and I’v come
to the conclusion it’s because he mickey moused the radio wiring. My panel
feed (purple/white) and dimmer wire (grey) aren’t hooked up to anything on
the back of the radio. But the thing is the radio only has 4 extra wires
after hooking the speaker wires up, ground, constant 12v, ign acc and amp
feed.
Can you please tell me the brand of wire harness you got for the truck I
have tried many times with different harnesses and they didn’t work
does all 04 and up model cars has to have a special harness
I hooked up my gmoslan02 wirining harness and now only my rear speakers
play and i dont get full sound throughout the car and my chimes dont work
you think you may know whats wrong
I have a 2003 Silverado base extended cab and I wanted to know if the
pioneer DEHX6600BT will fit my dash without doing any cutting
if you need parts order them off of “amazon” best place for in dash kit and
wiring harness
What kind of mounting kit did.you use?
we follow your videos, hubby has a 2006 duramax extended cab. Have you
replaced speakers yet? would love to see how!
I have the same model truck but I need a double DIN and cant find the kit!
Can you help me find one? thanks!
i have a 05 tahoe with onstar do u have to have a special onstar harness to
install a aftermarket head unit?
@Lasurge1982 No it does not. There is a whole separate set of issues with
the bose system. The truck I have now has the bose system, and it is
proving a lot more expensive to change.
@Lasurge1982 I am not sure.
So, 2005 Silverado here, no power to the new deck… What could be the
problem…
I got the same stereo and im trying to hoik it up in tge same truck but the
only thing I dont have is that black gm piece but do I need that piece for
it to turn on because im having problems getting power to my new stereo
@screw602 That is going to be a connection problem, or just a bad radio out
of the box. Was the deck you installed new? Try putting the old deck back
in and see if it works.
@italianmoses If you have a local stereo shop, that is the place to start.
If I remember correctly, it is a metra part. Just google metra.
Hi, i Have a Silverado 2005 1500 and i don,t know what is the name (Model
or Spare), to the module Adapter you Used for don’t Lost the sound of the
alarms in the speakers with the new Radio?, Regards
also what is on the end of the orange wire. On my harness there is an
orange wire but not another orange wire to connect it to so i was wondering
what to do with it. thank you.
It saves you from having to shop up the dash wiring. There is some stuff in
that wiring on some of these cars that if wires wrong, can cause airbag
issues, and other problems. Back in the day, we would cut the wires and
splice it in. These days it is required at a stereo shop if you want them
to install it.
Any local stereo shop. There i snot much margin in this products, so you
will still spend over 100 dollars if you want to keep your chime.
@boomstickkid Yes. It is held one with clips.
how do i get the radio out of my 99 silverado
scotty.lee.allen1988@gmail.com please seone imhaving a brain art r tsis
harder ten i thought!
@mrhenderson I believe you remove the mounts from the factory radio and
bolt them to the new radio. It has been a while since I did one.
@licherik I would try calling pioneer directly
this is great. last little bit i needed two know to install my sys. stupid
150 @ best buy…..hahaha
Great video, thank you
@billyhunt95 I think so.
@Friscojarretts yeah brand new nd okay ill try putting in the old one and
seeing if it works
@termkk There is a kit for that. Go to the metra website and look up your
truck. If you do not use the kit you have to cut the wires.
My local car stereo store
do u know by any chance what would happen if i didnt have the onstar
harness?
@FriscoJarretts I already got the kit and some tint I’ll be ballin!