Car over heating well here’s how to change your thermostat on your Chevy Malibu with the 3.5 and it only offers a 195 degree thermostat Tools needed Flat hea…
Car over heating well here’s how to change your thermostat on your Chevy Malibu with the 3.5 and it only offers a 195 degree thermostat Tools needed Flat hea…
You must be logged in to post a comment.
hey whats that thing with the green cap u can see it when u pause it at 2:52
didn’t show anything
You my good sir are a fucken idiot. Your video didn’t show me how to do
shit. Thanks for nothing!!!
Pointless when you don’t show the actual thermostat location. Get someone
to hold the camera and do it right.
You need an actual camera person helping you because you didn’t show ALOT
of what you did. The camera was too close and you also didn’t show where
the thermostat was and how you took it out….you skipped. so I stopped
watching.
What this guy left out is you have to torch the bolts when u get the new
thermostat in so it will seal it
Please help .. which way does the thermostat go on. ? I took it out but did
pay attention to the way it was.now my car is just sitting there..
That was really helpful.. just some tips: 1) have the appropriate tools to
remove the two bolts 2) Have antifreeze to refill, since once you remove
the two bolts and the thermostat, antifreeze will start coming out. 3)Place
an oil bin under the car for the antifreeze will split to the floor. 4)
Have the new thermostat ready to be changed. Besides that everything was
really simple.
Also, one more comment and question. Based on the research I have done. I
have a bad catalytic converter which damage my thermostat, but also, could
be vice versa? what do you think? Thank you for this video.. please make
some comments regarding this issue.
Thank you very helpful i try to aways do things myself ob my Malibu but it
can be hard. I was gonna take me car to a mechanic to do the thermostat but
this video gave me the info to do it myself.
I agree ,sometimes the bigger cams i was using made good close ups
impossible due to size but now i have new smaller cams just for tight spots
,wide angles and video i could never get before.
This is to guide you to the area!!!!! SINCE there is nooooooooooooooooooo
possible way to see it ,how do you honestly think a fx7 will fit in there
to film it get real. This is to walk you through it not do it for you. Now
since the video i do have a smaller cam but its still a tight spot to fit a
camera and do the work maybe youll think bout that before blasting the guy
tryin to help you!!
I would suggest to zoom in to the actual place, then zoom out when you are
taking off the bolts. After that, avoid all abbreviations unless they have
been stated before and your average viewer knows what you are talking
about. Other than that, thanks for uploading.
VIDEO FAIL!! After watching your video I still have no f&*^ing idea where
the thermostat is located, other than somewhere in the region of in the air
intake hose! Please next time review your video to determine if the average
viewer would be able to guestimate where the specific item is or make sure
it is CLEARLY VISIBLE in the video. Thank you.