Website: https://www.brotherstrucks.com/
Classic Truck Specialist David Welch gives a step-by-step guide on removing and installing Cab Mounts on 1973-1987 Squarebody Chevrolet or GMC Pickups. Dave also shows us what these bushings look like as well talking about why he prefers installing Urethane mounts when removing the factory Rubber type. Replacing the bushings will help you keep your sheetmetal aligned and your truck riding smoothly down the road. If you need parts for your Classic Truck visit https://www.brotherstrucks.com/
Parts used:
Urethane Body Mounts: https://bit.ly/3gWTLZW
Connect with us:
Instagram: https://www.instagram.com/brotherstrucks/
Facebook: https://www.facebook.com/brotherstrucks/
Twitter: https://twitter.com/brotherstrucks
Your video is the absolute best presentation on the subject of replacing cab mounts that I have seen. I have a question . The cab on my 2000 S-10 shifted driver’s side to passenger side about three quarters of an inch. What is going on with the cab mounts on my truck? Thanks!
my radiator bushings are bad do I have to change all of the them or can I just change the radiator bushings I'm sure all of them is bad though
This guy's the best
What are the torque specs on those bolts?
Where is a good place to get a seat for a 1975 c20 pickup? What other years will fit that seat? Thank you
Safety Tip – All the presentations are so well organized and prepared, thank you so much. In this one, I cringed while you were jacking underneath and your fingers were exposed to the pinch point. I would suggest to viewers to place something in between the body and the frame, JIC there is any unexpected movement that might crush fingers. Thank you again for your outstanding efforts that are truly so helpful.
You are Amazing. Thank You.
Do u have a video of alignment of the cab if some of us pulled off the cab completely?
Is there a way to do it by taking the cab braces ? I have to replace them anyway if not I’m going to sawzall through my bushings, don’t want to cut through my floor
What is the thread pitch on the bolts and the caged nut?
Super video, very helpful. I have a 1991 suburban that I have to change body mount on. BUT I need these washer.mine is ruined by rust. But is not to be found. anyone know?
What is the solution if my washers are rusted beyond repair?
Hey brothers trucks, my 1970 c15 has the front end shifted to the passenger side, I loosened the rad mount bolts and I managed to shift it back to the driver side but I need to move it another 1/2”, can I loosen the cab and shift it more? Any tips on shifting the cab as well or is brute force required lol
Any tips for replacing the cab floor braces both the one that goes to the rocker/ kick panel and the main support channel on my 73 are in bad shape and I have the replacements just trying to figure out how to do it before I just dive in
Does the mounts you installed in this video fit a 77? I ordered part number NRG6108 and says it’s for 81-87. The mounts look exactly the same
I'm getting rid of the body lift. I'm also replacing the cab. Frame is a 1979 k10 and the cab is a 1985. The original bolts are gone and I will like to know what the sizes are of the original bolts. Any help would be appreciated.
Great video! I have a 1981 K 10 and I’m having a problem with my gas tanks I believe it’s the vent hose and that’s it’s possible clogged. Anyway you guys can do a video on it or possibly how to remove the gas tank and clean everything out that would be great thanks! Jack
thats one big wrench.
I had to cut all my cages out on my G body it was so rusted and bad so I know the program sometimes it’s just a pain in the butt
Kick ass demo video Dave ! Easy to understand and makes a confident to tackle it himself!!
I have a 1980 k10. Do I need a particular set? I didn’t see one for a 4wd half ton in my year