How to Repair/Rebuild the power window regulator for a 2000-2005 Cadillac Deville, DHS, or DTS. http://www.powerupauto.com.
How to Repair/Rebuild the power window regulator for a 2000-2005 Cadillac Deville, DHS, or DTS. http://www.powerupauto.com.
You must be logged in to post a comment.
){kind=link}
How did you get the cable to go around the wheel that’s the most important part and its doesn’t even show it smh
Are your regulators like the ones that have the plastic parts that fail or are they built with the metal wires that you depict in the video?
Hey Scott, thanks for the prompt service. I got the regulator in actually under 24 hours. I have a question for you now though. I put the whole thing in and when I went to connect the wiring, I noticed that the plug on the new motor is smaller than the old on. Is there a way that I can swap just the plugs out? My email is jjflappy@gmail.com
Thanks Scott, I bought one of YOUR regulators. Went in and out almost as simply as shown on the video. Regulators can be had cheaper on the net, but they dont show you HOW to do it. That is why you got MY business.
Some close-up pictures of each step (before/after) would go along way to improve this video. It doesn’t have to be in real time. Very informative … it would just be nice to see better … somewhat like watching a magician … “How EXACTLY, did he do that?”
Good procedure. I used it to fix mine thanks. I suggest you show some detail like how the loops go over the bead on the cable. It was hard to tell what holes you were running the wire through. Thanks for your help. You saved me a bunch of money.