Buy Now!
New High Pressure Fuel Pump from 1AAuto.com https://trq.video/ia-1AFPU01722
This video shows you how to install a fuel pump on your 2010-2016 Cadillac SRX. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This repair was done on a 2013 Cadillac SRX Premium 3.6L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX
Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver https://trq.video/oPV-1AXAA00013
• 17mm Wrench https://trq.video/onj-1AXAA00010
• 10mm Socket https://trq.video/oIQ-1AXAA00017
• 15mm Socket https://trq.video/oPk-1AXAA00015
• 19mm Socket
• 22mm Socket https://trq.video/oc9-1AXAA00266
• Trim Tool Set https://trq.video/opL-1AXXX00006
• T30 Socket
• Swivel
• Drill
• Cloth Rags https://trq.video/ohf-1AXSS00035
• Paper Towels https://trq.video/ohf-1AXSS00035
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-SlDchxdGvEQ2K47hBuE-n
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you great video
Should explain that this is the HPFP and that there is also one in the tank.
Can I just use a wrench to tighten bolts to be tight or do I have to have a torque? @trq
Why does it have to be on the flat if it wasn't already?
Just replaced the HPFP on my 11 SRX has the same V6. Went smooth the only issue I had was the bottom bolt I had to use a 1/4 in 10 MM with a swivel extension and a 1/4 to 3/8 adapter to use a 3/8 ratchet to bust it loose and to tighten it. Tried two 3/8 swivels and both were too big or didn’t swivel the correct way.
Dose a bad fuel Guage still moves?
Thanks……
Is there another fuel pump in the tank
Can you help me out and tell me where to find the fuel filter on the 2010 Cadillac SRX