How to Replace Front Lower Control Arm 08-14 Cadillac CTS

How to Replace Front Lower Control Arm 08-14 Cadillac CTS

Buy Now!
New Control Arm with Ball Joint from

1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged control arms with ball joint. This video is applicable to the 08, 09, 10, 11, 12, 13, 14, Cadillac CTS.

🔧 List of tools used:
• Pry Bar
• 21mm wrench
• 18mm Socket
• 21mm Socket
• 24mm Socket
• Plastic Fastener Remover
• 1/2 Inch Breaker Bar
• A Piece of Pipe (for leverage)
• Ratchet
• Torque Wrench
• Anti-Seize Grease
• Block of Wood
• Marker / Writing Utensil
• Rust Penetrant
• 6mm Hex Socket
• Center Punch
• Hammer

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



t [kmaron] NG says:

Cant replace just the bushings??

Polo Gonzalez says:

Can you do a video for a 2nd gen SRX?

Comments are disabled for this post.