Car Fix DIY Videos

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com https://trq.video/ic-1AECS00109

This video shows you how to install a new crankshaft position sensor from TRQ on your 2007-2014 Cadillac Escalade (6.2L V8). The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

Estimated installation time for a professional technician is approximately: 1 hour 24 minutes

This repair was done on a 2013 Cadillac Escalade Luxury 6.2L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obYb-1AXAA00013
• 10mm Socket https://trq.video/ob6J-1AXAA00017
• 13mm Socket https://trq.video/ocBB-1AXAA00015
• 14mm Socket https://trq.video/ocBB-1AXAA00015
• 22mm Socket https://trq.video/oxt-1AXAA00266
• Ratchet https://trq.video/ocBA-1AXAA00016
• Socket Extensions https://trq.video/ocBB-1AXAA00015
• Torque Wrench https://trq.video/obC4-1AXAA00044
• Gloves https://trq.video/obSj-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaVi-1AXAA00068
• Jack Stands https://trq.video/oaGV-1AXAA00065
• Pick https://trq.video/oaeG-1AXAA00037
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.