http://www.1aauto.com/1A/HeadLights/Cadillac/CTS/1ALHP00199 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fa…
http://www.1aauto.com/1A/HeadLights/Cadillac/CTS/1ALHP00199 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fa…
You must be logged in to post a comment.
We carry new taillights on our website 1aauto.com 888-844-3393
They should both come out the same way.
I cant seem to get the high beams to come out its like they don’t want to be untwisted what should I do? and I installed the low beams but they only come on when I turn on the high beam
Thanks 1AAuto you helped me save money with this easy to understand video….. It took me about 1 hour to replace my driver side headlight only because I did not use a lift or jack… I removed all the snap in plugs but only removed the 10 mm screws and nuts from the driver side which needed replaced. Again I just want to thank you guys because they were going to charge me $140 at the repair shop.
thanks man helped out a lot
I need two tale light covers …they both broke off when i went through a car wash….im in dallas.tx
10mm deep socket. Pull the pins off the top of the trunk and remove the liner. There’s 8 bolts there. Remove em and be careful because the bezel gets loose. Afterwards, you can move the bezel to access the lights.
We do not have a video that shows you how to do this. You may be able to access them from inside of the trunk or there might be a screw that holds the lens in place. They shouldn’t be to difficult to repalace.
How do u replace the little license plate lights
You may be able to get a new one from the dealer.
where can i get those black round fasteners or what size are they? thanks in advance! (broke a few when changing hr
Awesome video I just replaced my headlights on my cts in under an hour I was about to give the dealer 125 for the same job…great job a1
Probably the worst part about owning a 2003 cadillac cts.
I manage to get by without removing the front panel completely. The plastic grill area is pretty flexible and you can manage to temporarily bend it out a little bit.
You would need to replace the entire light because they are a fused piece. We carry them on our website 1aauto.com 888-844-3393 with free shipping.
Thanks for watching 1aauto.com 888-844-3393
great vid. I feel inspired to do this my self and not pay the dealer.
Good Gawd Thank YOU for this video. The service department wanted $120.00 to do this and I did it in 30 min. THANK YOU. You just made a customer.
Hello, first, thanks for the great videos. My passenger side HL was cracked a few weeks ago and this morning I noticed my dim light was out on it… Can just the lens be replaced when replacing the bulb??? Thanks a lot!
You’re welcome. Have a great day! 1aauto.com 888-844-3393
Another great video! Followed everything step by step was able to switch my lights to HIDs. Putting it back on was definitely easier than the removal process. Couldn’t have done it without this video thanks again A1.
who the heck was the engineer on this car,,,,i guess this is how gm gets you to take it to the dealer….
thank you this was a huge help!
Really appreciate this A1… Wish me luck this weekend.
You’re welcome have a great day!
THANK YOU!
Thank you for visiting our channel on YouTube. Have a great day. 1aauto.com 888-844-3343
Thanks for the demo. My project went good. I’ll keep 1AAuto in mind.
Thanks for checking us out. Have a great day. 1aauto.com 888-844-3393
Very very nice tutorial. Running into stuck pins and collars on the retainers, plugging the electrical into the headlight *after* it was assembled, and correcting the overhanging ‘bottom lip” on the bottom splash pan — is all stuff that we would run into, on a REAL install, but I always see would have been edited out of those hokey, “everything perfect” TV shows.
__ A very good, very real shop experience and sharp quick thinking recoveries that get the job done.
We currently do not have a video of this repair. You may be able to reach in back of the housing and unscrew it. If not then there should be three bolts (I believe) that are holding it in place. Here’s a link to that light on our website. It should give you an idea as to where the bolts are. 1aauto.com/1A/HeadLights/Cadillac/CTS/1ALHL01884/521563/2009
Good stuff can you do a 2009 cts my Low beam went our and the dealership us charging me $800…wtf?
Outstanding explanation !! Thank you sir for taking the time and posting this video!!