DIY AC HIGH PRESSURE SWITCH SENSOR ON 2012 CADILLAC CTS COUPE | AC NOT BLOWING COLD | EASY FIX

DIY AC HIGH PRESSURE SWITCH SENSOR ON 2012 CADILLAC CTS COUPE |  AC NOT BLOWING COLD | EASY FIX

#DIY #CTSCoupe #2012Ctscoupe #3.6 #Cts4 #chevygang #highpressuresensor #acswitch #cadillacCTSVCouoe

10,695
Like
Save


Comments

SoulTaker says:

I had to change it on mine. It's like a coils covered in ceramic and all the ceramic was broken on mine. Instant fix!

SoulTaker says:

There's a sensor that goes beside the radiator on the passenger side that touches the condenser. It's bad

David Ragland says:

Tight! I knew It Wuz Something Basic My A/C has been like that 4 Two summers Gonna Try It . All Da Playas Came! Mechanic Sed I needed a Condenser!!

Rogelio Acosta says:

I saw this 30 min ago and so I went to go and fix it and now it’s fixed, man I was about to pay a butt load jsut for a 50 dollar part.

Desto Trill says:

My 2011 Cadillac CTS sedan is the exact same interior

Train Handler 95 says:

My lights are and control aren’t working on my CTs coupe do you no what that could be? The battery died and the guy changed the battery and when we pulled off none of the lights on the ac or heat are working.

James Sowder says:

I hear you bro, I'm not going to pay somebody else to do it for hundreds of dollars if I can do it myself for the cost of the part!

Donald James says:

I have a 2012 Cadillac CTS coupe I changed the switch and it seems to be doing the same thing blowing warm sometimes then cold. Do you have any other suggestions?

Alan Du Verger says:

Thanks for the video. My 2011 is having the same issue. I went to Cadillac on friday this past week and talked to the parts department and the man there said this

yessir says:

Was your car overheating as well because of this issue?

Comments are disabled for this post.