Car Fix DIY Videos

Battery you need – https://amzn.to/2YWZ7e7

Here is a quick little video on how to change the Cadillac XLR Key Remote Battery. It takes (1) 2032 battery. A little screwdriver is helpful but not mandatory. Hope this was helpful for you!

How To Replace Cadillac XLR Key Fob Battery 2004 2005 2006 2007 2008
This video will show you How To Replace Cadillac XLR Key Fob Battery 2004 2005 2006 2007 2008
This is a Factory OEM (Original Equipment Manufacturer) Cadillac XLR 3 Button keyless entry remote, aka “key fob”.

Obtain all remote transmitters for this vehicle.
1. Start with vehicle off and key out of ignition, open the trunk.
2. Place a currently functioning remote as well as the new remote(s) inside the cabin of the vehicle.
3. Insert key into the trunk lock cylinder and cycle the lock cylinder to UNLOCK 5 times in 5 seconds. READY FOR FOB #X (X will be remote 2, 3, or 4) will be displayed on the DIC (Driver Information Center).
4. Locate the remote pocket in the glove box. Place the new, un-programmed remote in the pocket in the center console with the buttons facing to the right of the vehicle.
5. When the programming is complete you will hear an audible tone. READY FOR FOB #X or MAX # FOBS LEARNED will now be displayed on the DIC.
6. Remove first remote that was programmed and place next remote to be programmed in the remote pocket.
7. Once all remotes have been programmed in the pocket you can exit program mode and test all remotes for proper programming.
NOTE: WHEN PROGRAMMING REMOTES WITH A REMOTE START FUNCTION YOU MUST IDLE VEHICLE FOR 20 TO 30 MINUTES AND LEAVE REMOTES IN PROGRAMMING POCKET.