No problem. Hope it goes well for you. Couple of other things I’ve thought
of; The sensor on the radiator I now believe was to detect low coolant.
Expect the low coolant light to come on after you put it together for a few
car rides as there will be air in the system. Keep your eye on the
temperature gauge and as long as that is fine you should be fine. Be sure
your overflow container has fluid as the heating & cooling down process
will pull fluid from the container to the radiator.
Thanks for the video, Im about to change mine. How long did this process
take for you?
Your welcome. I would allow four hours for the installation
How did you get the engine mounts back on to the frame member? On you #3
post, you mentioned that the engine “sprung back” after removing the mounts
thanks for responding so quick. I’m starting my tomorrow morning
Its very easy. Just clamp it back on by hand.
No problem. Hope it goes well for you. Couple of other things I’ve thought
of; The sensor on the radiator I now believe was to detect low coolant.
Expect the low coolant light to come on after you put it together for a few
car rides as there will be air in the system. Keep your eye on the
temperature gauge and as long as that is fine you should be fine. Be sure
your overflow container has fluid as the heating & cooling down process
will pull fluid from the container to the radiator.