Buy Now!
New Harmonic Balancer from 1AAuto.com http://1aau.to/ia/1AEHB00196
For many vehicles, the harmonic balancer not only helps balance the engine, but also drives the accessory belt. If your engine is vibrating, or belts are slipping, you might need a new harmonic balancer. This video shows you how to install a new harmonic balancer on your 2000-2005 Buick LeSabre.
This process should be similar on the following vehicles:
2000 Buick LeSabre
2001 Buick LeSabre
2002 Buick LeSabre
2003 Buick LeSabre
2004 Buick LeSabre
2005 Buick LeSabre
Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 24mm Socket
• Harmonic Balancer Puller http://1aau.to/oa/1AEHB00094
• Serpentine Belt Tensioner Tool http://1aau.to/oa/1AXAA00019
• Trim Tool Set http://1aau.to/oa/1AXXX00004
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Cloth Rags http://1aau.to/oa/1AXSS00035
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Buick LeSabre 8th Gen 2000-2005: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-MQnh_mAcbDfC3Ft1lP1yt
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I did my sensor I thought I aligned harmonic balancer with the key but I didn't so I have some key groves on the harmonic balancer do I need to replace it