http://www.1aauto.com/1A/HeadLights/Buick/Century/1ALHP00078 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights….
http://www.1aauto.com/1A/HeadLights/Buick/Century/1ALHP00078 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights….
You must be logged in to post a comment.
){kind=link}
Thank you very much. Very easy instructions.
You’re welcome. 1aauto.com 888-844-3393
Thank u for the help
What website is the best to buy new headlight assembly?
You can check us out online at 1aauto.com 888-844-3393 all of parts include
free shipping in the lower 48 states.
Thank you! You save me both time and money both of witch i don’t have much
of.
I have a 2001 Buick Regal Century. The lights are only working in brights
but you have to keep the lever back and if you don’t the lights turn off. I
really need help with this don’t know whats going on and need the car for
work.
i understand how to remove the headlamp housing unit, but how do you
replace the blub inside the socket, the replacement blubs are separate from
the socket
Ok ,video is good ,but how do you get used blub out of socket ?
@xKerdzx You should be able to pull up on the two tabs that hold the
headlight in, and then remove the tabs. The headlight should then slide
right out as shown in the video.
Super informative and easy to do thank you for showing me how.
i have a 96 buick regal and i was wondering how to change the headlights.
if have any tips
Thank you 1A; I have replaced the turn signal bulb (the culprit) twice in a
two-week span with both bulbs lasting only a few days. I’m wondering if it
could be a wiring issue? Since the front signal is quite important, I was
considering buying an entire new headlight assembly, would that help?
Thanks in advance.
You may want to check the bulb socket to see if it’s corroded on the
inside, which could cause an issue like this.
Quick question – I’ve got a turn signal socket that keeps eating through
bulbs – any recommendations on how to fix this? There is some condensation
inside, but all the other lights work just fine in the assembly. Do I need
to buy a whole new assembly, or is there something that should be done with
the wiring?
I have a 97 park avenue and don’t see any clips like on the century. How do
i change it?
Thank you
Cool thanks. That helps!
you should make a fog light video
Does a fluted headlamp assembly be replaced with a non-fluted headlamp
assembly for a 2000 Buick LeSabre?
You can remove the headlight as shown in the video, then remove the black
cap that covers the bulbs. You can then access the headlight bulb to change
it.
We currently do not have a headlight auto repair video that shows this
particular repair on a 96 Buick Regal. If you open the hood, there may be a
couple of slides that you need to lift up on to remove them (like we show
in this video), or there may be a couple of bolts that hold them in place
on the backside of the light. Hope this helps you out.
Is this the same for a 1995 Buick Regal
@guralp08 Yes the limited style headlights will fit a base car and
vice-versa.
@shawnh2004 Currently we do not have an auto repair video that shows you
how to remove the headlights on a 97 Park Ave.