http://www.1aauto.com/1A/HeadLights/Buick/LeSabre/-/-/2003 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights…
http://www.1aauto.com/1A/HeadLights/Buick/LeSabre/-/-/2003 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights…
You must be logged in to post a comment.
){kind=link}
sorry i meant to state that i got my aftermarket from someone else. i just
wanted to watch your video to confirm install. I will check with the seller
on this. and i had the same thing as Michael John question below. the new
one didnt come with an aftermarket aiming mechanism and it doesnt seem like
the old one is coming off. thank you for your fast response
Your aftermarket replacement light should be made exactly the same as the
original one on your car. if you purchased the light from us and there’s an
issue, call our sales line and we’ll make sure that you received the right
part for your vehicle. 1aauto.com 888-844-3393
i have four bulbs on my 2001 buick lesabre custom. right next to the side
marker bulb theres a white twister with a bulb. is there another
aftermarket headlight unit for this vehicle or do i install the one i got
and leave this other bulb out??? thanks
Longer cranking can actually be several different things ranging from bad
fuel filter, failing fuel pump, dirty injectors, dirty throttle body, to
several other things other than the starter. You will want to bring it into
a shop for some maintenance and go from there.
Hey i have a 1996 Buick Lesabre i just bought and it works great but it had
problems starting. It starts but i have to hold the crank for a littler
longer sometimes. Could it be the fuel pump or starter?
I have a question… i was driving in the rain and water got in my
headlights .. my headlight are brand new … but days after the water
fogged up in there and water still in there … its 1 week now and its
still there how can i clean out the water?
Almost all headlights should come with the adjuster on the headlight.
Normally the adjustment is an internal piece and if the headlight did not
come with it, you may have to get a different headlight.
Thanks for watching. 1aauto.com 888-844-3393
I watched your video on how to replace the entire headlight assembly. I
replaced the broken factory with an aftermarket brand but it didn’t have
the headlight aiming mechanism on it. Can I remove this from the factory
headlight for install on the new headlight assembly. It sits on top and has
a grooved wheel that rotates. Looks like it is easy to remove but want to
make sure..
Great video really appreciate it
Thanks so much. I had the retaining bolts out and it wouldn’t budge; I was
terrified I was going to break something.