Great vid..I was about 2 pay a mechanic to change my drive shaft but good thing I seen this detailed video that does not compare to other boring ones… Thanks a lot
whoohoo, another great billstmaxx production! thanks for all your vids….it’s enjoyable, entertaining and educational the number 310 usually pops up for me….was my Boy Scout Troop number. 29 is the day last October that my nephew had his wreck….so yep, it’s around. kepp up the great work bill!
black sockets for the impact gun bill they dont crack I guess you did know that I break regular sockets all the time doing the same thing.
thats what I like you show the good the bad and the mistakes keep the videos comming bill.
one tip,,jacking spindle up a bit makes strut bolts come out easier,, and chances are if axle n tie rod end are bad,,lower ball joints bad too.getting axles out,,short pry bar, from underneath,,between axle where it meets transaxle,,give it a pop,,comes right out.
Bill I have always been taught to slide the wheels under the car that I am working on. Just incase the car comes off the stands it will land on the tire instead if you. all though the rim is only 7-8″ wide it will give you enough room to get an arm or leg out.
If the noise continues, then the next step is to put duck tape over each of the kid’s mouths, and then if the sound stops, you can take all the expenses for all the parts out of their allowance.
…Wife’s Birthday 29 November, Wedding Anniversary, 29, August. In my life if I remember the number 29, it keeps me alive since it helps me remember anniversaries and wife birthdays.
I’m always seing 911 or 9/11 or 9-11 IDK why i can just randomly look at the clock and the time be 9:11. I might need to use that number in the lotto lol
I second albinosguy’s comment… When you’re knocking out a bolt w/ a hammer.. always spin the nut on a couple of turns to protect the threads on the end of the bolt.. THEN you can whack away w/o damaging the bolt threads.
Just another awesome BillsTmaxx production,, I think we appreciate you as much as you us.. I think i said that right…LOL . Just keep being Bill. thanks for all your hard work making these videos…
Great vid..I was about 2 pay a mechanic to change my drive shaft but good thing I seen this detailed video that does not compare to other boring ones… Thanks a lot
8:35 if that socket would have broke it would have been a bad video, never use chrome sockets on impact gun.
°!° cool i subbed! thx nice Video!+++funny +funny
have fun++++++great time! 🙂
whoohoo, another great billstmaxx production! thanks for all your vids….it’s enjoyable, entertaining and educational the number 310 usually pops up for me….was my Boy Scout Troop number. 29 is the day last October that my nephew had his wreck….so yep, it’s around. kepp up the great work bill!
black sockets for the impact gun bill they dont crack I guess you did know that I break regular sockets all the time doing the same thing.
thats what I like you show the good the bad and the mistakes keep the videos comming bill.
Hey Bill maybe poop some silicone grease or something on the boots so they don’t crack all up so fast again.
:)
I have just checked my T-shirt for 28/29 and I was right thinking XXl does that make me a smarty pants or a fat boy lol
love the long vidz ,,keep em coming,,you n adam wake me up everymorning with coffee n your vidz.one of these days i’ll head up north n visit yas.
one tip,,jacking spindle up a bit makes strut bolts come out easier,, and chances are if axle n tie rod end are bad,,lower ball joints bad too.getting axles out,,short pry bar, from underneath,,between axle where it meets transaxle,,give it a pop,,comes right out.
Bill for Prime Minister ya mean!!! EH?
ment why not obama blew it
bill for president, why now obama blew, mit sucks. maybe bill can do better.
u make the best videos on you tube bill keep them going
Thank you Bill for all the work you do in getting these videos for us to watch!
Lower ball joint rivets you cut or grind off, not hammer. Make sure to put red thread lock on those.
I still think its that wheel bearing that squeels bill . It shows up mostly backing up .
Bill I have always been taught to slide the wheels under the car that I am working on. Just incase the car comes off the stands it will land on the tire instead if you. all though the rim is only 7-8″ wide it will give you enough room to get an arm or leg out.
great video bill :)
you need a BFH… bigger fucking hammer lol
When you were spinning the bearing it sounded a little crusty I think the sound was coming from that
If the noise continues, then the next step is to put duck tape over each of the kid’s mouths, and then if the sound stops, you can take all the expenses for all the parts out of their allowance.
…Wife’s Birthday 29 November, Wedding Anniversary, 29, August. In my life if I remember the number 29, it keeps me alive since it helps me remember anniversaries and wife birthdays.
it,s 10 or 12 for mete 🙁
All car manufacturers build stuff so it will break when you take it apart so toy will have to buy more parts. Every manufacturer does it.
Thank you for the videos bill!
Please don’t over tighten the driveshaft nut….torque wrench, not the impact gun!
Bill its breakfast time do you know what i am missing homie?
If the boot is ripped, chances are the c v joint is junk also.
I’m always seing 911 or 9/11 or 9-11 IDK why i can just randomly look at the clock and the time be 9:11. I might need to use that number in the lotto lol
29
Nice video.
I second albinosguy’s comment… When you’re knocking out a bolt w/ a hammer.. always spin the nut on a couple of turns to protect the threads on the end of the bolt.. THEN you can whack away w/o damaging the bolt threads.
billll dont use unforged socket on the impact…. there you were told. late lol
Just another awesome BillsTmaxx production,, I think we appreciate you as much as you us.. I think i said that right…LOL . Just keep being Bill. thanks for all your hard work making these videos…
Bill please put safety glasses on when your working mate, eyes are just too dam easy to damage 🙁
Your a handy man to learn from bill, those air tools look like a god send 🙂
Smashing vid 😉
I hate salt..
your wellcome bill