Upgrade your BMW F series to CSL style DRLs from Mashimarho! Read description for updated install!!

Upgrade your BMW F series to CSL style DRLs from Mashimarho! Read description for updated install!!

Check out my new branded gear!
https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=%22bmw+diy+guy%22&_sacat=0

Lillith: The F87 M2 Competition build out
https://f87.bimmerpost.com/forums/showthread.php?t=1793229
Furiosa: The F32 435i build out
https://f30.bimmerpost.com/forums/showthread.php?t=1622618

The exclusive M4 CSL and the gorgeous M5 CS have distinct yellow DRL/halos to make them stand out! Now you can easily have the same look on your F series car with this kit from Mashimarho!

The install is easy and wont take very long.

**UPDATED PROCESS**

Important note – Make sure to watch the section about the driver’s side install. It is VERY VERY easy to snap off a resister while you install, which will cause the board to fail. Be very careful when inserting the driver’s side assembly and don’t make the mistake I did on my first attempt.

BE VERY VERY CAREFUL reinstalling the driver’s side assembly, as it is spectacularly easy to scrape off the resister. It may also be possible that using the 3M tape pushes the board slightly closer, making it more vulnerable to be scraped off. If so, then use thermal glue to reduce the slight thickness of the tape during the install. The OEM board does not have any exposed resistors in that position, so are not as vulnerable.

Required parts and tools:
Yellow DRL kit
https://mashimarho.com/products/bmw-f8x-m3-m4-colored-led-halo-kit?_pos=3&_sid=823118149&_ss=r&variant=40142213677155
t20 torx bit and driver
shop knife
3M double-sided adhesive or thermal glue
https://www.amazon.com/Halnziye-Conductive-Silicone-Adhesive-Compound/dp/B07L7WFSJ2/ref=sr_1_5?content-id=amzn1.sym.9575273b-ecd8-4648-9bf0-15f20c657e0a&keywords=heat+conductive+glue&pd_rd_r=c5c8af01-87e7-461a-adab-41a989390955&pd_rd_w=4V7kE&pd_rd_wg=3NRw6&pf_rd_p=9575273b-ecd8-4648-9bf0-15f20c657e0a&pf_rd_r=X7XBSVYGWQKK3VHC2X06&qid=1674252475&sr=8-5

Nice to have:
Good lighting
https://www.amazon.com/Ryobi-P720-18-Volt-20-Watt-Included/dp/B018A3BT1W/ref=sr_1_9?keywords=ryobi+shop+light&qid=1553787499&s=gateway&sr=8-9
Great music – Larkin Poe is just amazing, check them out!
https://www.larkinpoe.com/

Thanks for watching and please try everything at your own risk. All work shown in best faith and effort, do this at your own risk.

This description may contain affiliate links. By purchasing a product through an affiliate link, you’ll get the exact same price and may earn a small commission. By purchasing products through affiliate links, you’re helping make this channel possible and we want to thank you for your support!

343
Like
Save


Comments

AJAXF1 says:

I am so glad to hear that they make this for the F8X! I watched your G8X one and immediately checked for it on their site but I guess that they released it shortly after. Super excited for this to be my next mod, thanks for the helpful tips on the resistor too!

Comments are disabled for this post.