A short tutorial on how to replace xenon bulb and also, how to remove headlight from your car, which is the tricky part of this job.
You will need
– D1S bulb (depends on your model, mine is E60 5 series)
– T30 torx long screw driver
– H8 socket (8mm)
It is relatively easy job. It takes about an hour. Tricky part is getting the headlight in and out. Take your time and you´ll be fine.
There is a BMW warning, that the lights must be OFF for any headlight manipulation. Be carefull, make sure the ignition is off, headlights in 0 position.
A word of warning – I am not a professional mechanic. Should you choose to follow this tutorial, you do that at your own risk.
){kind=link}
Comments
Comments are disabled for this post.