FlyPanda818: yeah, most people do reuse the old one, did you get the emblem
from us? we usually take it to the back, if you need new ones, just email
us your order confirmation numberand we will take care of you.
BBBBRYAN7899: the rims are different sizes, we have carbon fiber ones if
you are interested 🙂
This video is laughable. You see how easily he inserted that card under the
emblem at 0:19? Yeah right, just go try that on your own car and you will
see that you can’t insert anything under the emblem like that. The emblem
in this video was pre-loosened and the guy is thus a liar. Prying with a
screwdriver is guaranteed to cause gouges. Ignore this video and keep
searching for a good solution. Search the nylon packing strap method.
Thumbs up on the video. When I did it, my emblem didn’t come off so
smoothly (not that I really expected it too)…eventually it did, but
definitely be careful when turning the screwdriver as you pry, or else it
will scratch the paint, especially when using a business card or post card
–it is just paper after all. I’m going to have to apply a little touch-up
paint…
Hi, I am looking for instructions on replacing this emblem on BMW X3
backside. This does not look as simple as replacing the from emblems. In
order to grip the emblem the grommets have to be placed from inside the
hatch. Any help regarding this would be appreciated.
That didn’t work at all for mine… I tried to pry it up and one of the
plastic pieces broke off into the rubber piece. I had to drill into it then
pry it out with a screw driver.
mine are both stolen front and rear. The original once are 34-36 dollars a
piece on ebay. Is there a significant difference btw the original and the
once that are really cheap?
great video! i got my front hood emblem off without an issue on my
X3….but the rear hatch emblem isn’t working! It appears to be thicker or
maybe there is a metal ring around it? or am i missing something? help!
very helpful thank you. i was tired of reading video is better thanks
FlyPanda818: yeah, most people do reuse the old one, did you get the emblem
from us? we usually take it to the back, if you need new ones, just email
us your order confirmation numberand we will take care of you.
BBBBRYAN7899: the rims are different sizes, we have carbon fiber ones if
you are interested 🙂
This video is laughable. You see how easily he inserted that card under the
emblem at 0:19? Yeah right, just go try that on your own car and you will
see that you can’t insert anything under the emblem like that. The emblem
in this video was pre-loosened and the guy is thus a liar. Prying with a
screwdriver is guaranteed to cause gouges. Ignore this video and keep
searching for a good solution. Search the nylon packing strap method.
@samsung16k i thought that too!
Thumbs up on the video. When I did it, my emblem didn’t come off so
smoothly (not that I really expected it too)…eventually it did, but
definitely be careful when turning the screwdriver as you pry, or else it
will scratch the paint, especially when using a business card or post card
–it is just paper after all. I’m going to have to apply a little touch-up
paint…
is it the same for the mercedes hood ornament?
Thanks for sharing!!!
Perfect ~ thanks!!!
very good idea, i have an e60 myself, Going to do blackouts?
would you consider putting a video instructionhere how to change a front
grill by any chance? i’m interested about doing it on e60.thanks
Way to easy to remove…No wonder the one off my 330I was stolen. 🙁
very nice guide for emblem robbers
Thanks for the instructions. Is the emblem made out of plastic?
Hi, I am looking for instructions on replacing this emblem on BMW X3
backside. This does not look as simple as replacing the from emblems. In
order to grip the emblem the grommets have to be placed from inside the
hatch. Any help regarding this would be appreciated.
Yes, pretty much 🙂
Pretty much the same way…..and you really have to pry it off
slowly…patience is key!
thanks, very useful… emblems can be found at ebay..
thank you 🙂
ebay
Is this installment of a BMW emblem the very same for a 1997 318i sedan?
Is this the same for all models like i have a 97 328is will it work aswell?
great advice …thanks from me and my 740iL
thanks for the upload mate, it worked a treat! 😀
You can get it on our website Thanks!
Would you use the same basic method for replacing the emblem on the trunk
as well?
My emblem snapped off inside the grommets… sigh
how do you remove the logo on steering wheel..? do you have any idea..?
Where do you buy those small grommets(rubber inserts)? I just bought a new
emblem and it didn’t come with any.
THANKS ,MY WIFE REPLACE THE EMBLEM AND IT WAS PERFECT JUST THE WAY YOU
SHOWED IT,,NO DAMAGE TO THE PAINT AND LESS THAN A MINUTE,,
That didn’t work at all for mine… I tried to pry it up and one of the
plastic pieces broke off into the rubber piece. I had to drill into it then
pry it out with a screw driver.
buy new ones on ebay, they will come with replacement grommets
Thanks that helped me 🙂
is it the same on the rims of the bmw?
The ones that we sell come with grommets 🙂 Thanks!
@210autobots fleabay
and or what are they called?
mine are both stolen front and rear. The original once are 34-36 dollars a
piece on ebay. Is there a significant difference btw the original and the
once that are really cheap?
great video! i got my front hood emblem off without an issue on my
X3….but the rear hatch emblem isn’t working! It appears to be thicker or
maybe there is a metal ring around it? or am i missing something? help!
no they made of aluminium just glued on plastic dude
This is alot easier than i thought lol
thank you! helped alot
SORRY TheLarryBrown but youre wrong my wife did it the same way as
shown,and it was perfect,,it took her less than a minute,,no damage to the
paint..
where can you buy the grommets????????
the emblem on mine needs replacing, where did you get the new 1 from???
Thanks!
You are welcome, yes, these Genuine BMW ones are made of plastic, they
always have been 🙂