Another DIY showing how to disconnect your Instrument Cluster and replace the bulbs. Pretty simple process besides the tight space behind the cluster. Be sur…
Another DIY showing how to disconnect your Instrument Cluster and replace the bulbs. Pretty simple process besides the tight space behind the cluster. Be sur…
You must be logged in to post a comment.
){kind=link}
You can get these bulbs from Pelican Parts. I tried to remove the bulbs
from their fasteners without luck so make sure you buy the bulbs with the
base on them. I am going to see if I can pull the cluster out enough to
gain access to the bulbs and use an inspection mirror to remove and install
because I don’t think I will be able to get the wire connectors off as
easily as BimmerSource did.
my gas light is super low on my e36 could the bulb just need changing ? is
this process the same I can use to say instal brighter LED lights ? or
bulbs type of thing. I just want the display to be super brighter.,… the
brightness swtich is set to maximum. but still pretty dark
How did you get the cluster out from behind the wheel?
You zoomed in so well I was able to get the specs off the bulbs to order on
Amazon prior to pulling my cluster!
What the size of the bulb that you pulled out?