http://www.euroautotraining.com The Car Commando gives tips and tricks for BMW Battery Safety Terminal (BST) diagnosis and repair. Find more On Demand Techni…
BMW Battery Safety Terminals (BST) – Diagnosing and Repairing
40
Like
Save
 – Diagnosing and Repairing')){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
iklooveui juyesca ioplo ki bmw nji german kiop kisuyz europa ni amerik
if it’s the kit pn 61128387512, I’m seeing prices around $400. I sure would
be interested to find the “half of two hundred” price! or, maybe there’s a
different pn?
There anyway to rig this to work after its blown?
y have the light check airbag red…… and i have this error. battery
savety terminal 1. what i have to change ..?
do these things fail for no darn reason at all ? I have a BST on my 2002
e46, that hasnt blown, but is showing a “resistance too high” from the BST
circuit. Any possibility of the black wire being loose or rusty i.e. is the
resistance measured between that black box wire -> the yellow plug on the
BST ? Thanks for the video, very helpful.
hi, ive got airbag and restraint sytem malfunction,the code that comes up
is ( 9AFF Resistance firing circuit, safety battery terminal, too high ),
the bst seems to be fine,ive cleaned every connection and had the codes
cleared,but it comes back on after a short time, the charging output is
about 14.5 volts from alternator when measured at the battery
terminals,also car has been to BMW for a recall issue concerning a cover
for the battery cable terminal in the trunk,cheers for your help
Thanks for the Great info.
Please sent this to all the rescue instructors who think thay know it all.
there anyway to rig this to work temporarily until i get a new one?
3.40 – If the BST blows the car will not start because it is the starter
cable that has been disconnected by it.
2 minutes in and it’s commercials — not even video, it’s still
illustrations and audio