Today we’re going to show you how to remove the door wire harness from an Audi A4 B6/B7. When buying a new harness, make sure matchup the number on the tag t…
Today we’re going to show you how to remove the door wire harness from an Audi A4 B6/B7. When buying a new harness, make sure matchup the number on the tag t…
You must be logged in to post a comment.
')){kind=link}
Hi is it possible to replace the harness without removing the door lock
acutator? Thanks
fixed it and did a make shift job to connect the disconnected wires. Then
used electrical tape and it works lol
hey man i just took apart my door and my wire harness is cracked up as well
one wire was cut and we did a quick fix to see if it would work temp. turns
out that red wire controlled the drivers window which was not working but
went down once! awsome now it won’t go back up again any any reason for
this?
Not really sure what could be going on there. I would make sure all of the
wires in the boot are getting a good connection. Even though some of the
wires just look like the outer housing is cracked they could also have a
bad connection.