https://www.1aauto.com/audi-a4-s4-headlight-pair/i/1alhp00658?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=xgfQRpMmrkc
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 05, 06, 07, 08 Audi A4
🔧 Instructions:
1. Servicing the Bulbs 0:52
2. Removing the Bumper Cover 3:37
3. Removing the Headlight 5:32
4. Installing the New Headlight 6:31
5. Adjusting the Light 7:48
6. Installing the Bumper Cover 8:09
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
A big thank you for all of the videos. I just recently purchased a 2007 Audi A4. it's a 10 year old car so I plan on doing minor work my self and you give detailed instructions, step by step, and even torque specs.
First, thank you so very much for this detailed video. Secondly, I need to replace both of my headlight units. Do I need to "align" or calibrate the new headlights so that the beam is correct? I hope my question makes sense- thanks!!
Approximately how long should this take if you're looking at removing the front of the car, if I take this to a shop? An hour…. two hours? Thanks!
Post-script… I just completed installation of a new bulb on the drivers' side, regular beam. Loosened the power steering reservoir to make more room for my hands, but the entire process took about 15 minutes all told. According to the shop I visited after buying the bulb (about $16 at a local shop), I could expect to pay approximately $200 for labor and tax. So I just saved myself a couple of hundred bucks…. THANK YOU SO MUCH for your videos 1A Auto!
This helped me so much. Thank you!!!!!! I feel i owe you a beer at least!
With all , and much due respect , I love your videos, they are all spot on so far. One MINOR exception, I just changed my driver's side headlight low beam bulb , it is too tight too just flip the door open and pull the bulb out, I ….at least had to un do the power steering fluid reservoir by removing two ten mm head bolts on the top of the bracket, and pull it up out of the grommet at bottom, and gently ease it out of the way, gaining access to the door and then bulb. Perhaps just as easy to remove headlight it's self and change out the turn signal bulb as well, with of course A1 auto parts…. Thanks… 🙂
you don't have to pull the whole car apart to change the headlight bulb. take the cover off, pull the black plug( making sure you don't pull the wires) and I found the bulb pulls out too. if you have big hands like me it's a little uncomfortable but I manage to change the bulb in under 2 mins. the bulb just pushes back in place securely. I'm so glad I had a go at this myself and not payed an expensive mechanic to do it for me. just use some common sense folks
Thank you again for the help and advice from water pump, timing belt to bulbs. Your stars, sorry I can not buy from you being in England. Maybe a PayPal donation to your favorite charity
All the very best
Thanks for the information very helpful.
Audi Crazy I'm having to find a mecanic to have this done as Halfords not allowed to do this.
Great video. it provides great tips and it is professionally shot. I had to replace the middle bulb on the passenger side and instead of removing the bumper, removed the air filter unit, which gave me enough space to pull the bulb. It may be faster this way for this side.
i can't believe all that for a bulb
I tried to get the black Connector out but only that came out not the light bulb with it
The tab at the top of the bulb, is there a notch on the housing? Just wondering how you can get this lined up if you're not pulling out the entire headlight.