How’s it going everyone, I know it’s been a minute since we’ve posted a video, but hopefully you like what we have in store for you!
For today, I will be showing you how to properly remove/ install your Valve cover gasket on a 2013 Audi S4. Please feel free to leave a comment with any questions you have regarding the process.
Also, if there’s anything you would like us to cover on this car let us know!
________________________________________________________________________________
This Tutorial is provided as a courtesy by Boost Dynamic Tuning
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (Including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (Express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material.
SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL.
In no event will Boost Dynamic Tuning, LLC or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.
The perfect tutorial video. Much appreciated
Did you have to bleed or flush the coolant or you just reinstall and refill the reservoir and done?
Have a estoril b8.5 S5. Was in for DSG and engine service. Take it to an Audi tech who works for Audi during the day and has his own personal shop. This is how I will always do it. Y’all the best. He noticed my valve covers leaking. Doing that job for me too!
Hey just watched your video and man it gave me the confidence to change gaskets out. Your the man thanks again
My kit came with a silicone sealant, is it needed?
i got oil coming out of the screws would it be the same problem
What type of Torque wrench do you use? Very helpful video by the way!
Can you change only one side gasket? Or Need to do it in pair ? I have only pasengers side leaking oil.
I've got a 2015 Q7 and it seems to have an oil leak somewhere near the rear passenger side. Do you think it is the valve cover gasket?