Car Fix DIY Videos

This service was performed on a 2013 Audi TTS with the 02E, 6-speed S-Tronic transmission. S-Tronic is Audi’s name for the 02E DSG gearbox, however, the 02E transmission is one of the most commonly used dual-clutch style gearboxes in Volkswagen and Audi models.

I will show you how to replace the transmission filter, drain and refill DSG fluid, and correctly set the fluid level using the scan tool.

Audi’s recommendation is to perform this service at 35,000 mile intervals.

————————————————————————————————————-

Temp Spec:

Transmission fluid temp for final check – 35 to 45C (95 to 113F)

Torque Specs:

Transmission filter housing – 20 Nm (15 ft.lbs)
Drain plug – 45 Nm (33 ft.lbs)
Tube inside fill port – 3 Nm (2.2 ft.lbs or 26.55 in.lbs)

————————————————————————————————————-

Parts Used:

G-052-182-A2 – DSG Fluid (Local Dealer)
EG218HD320 – Transmission Filter
N0438092 – Drain Plug Seal

————————————————————————————————————-

Tools Used:

Torque Wrench
Ratchet (3/8 and 1/2)
24mm Socket
14mm Hex Socket
8mm Hex Socket
5mm Hex Socket
10mm Socket
Extensions of various length
Pick
Large Pliers
Fluid Pump with at least 6 liter capacity – Transmission Filler Kit
Adapter for Filler – MVA586

Disclaimer:

The content of this video is available for informational and educational purposes only. Every situation may be different, and BCS Fixology does not make any warranties, whether express or implied, as to the accuracy, fitness, or applicability of the information or automotive parts portrayed in this video to any project and makes no guarantee of results. BCS Fixology will not be liable for any damages related to personal injury, property damage or loss of any kind that may result from the use or reliance on this video and/or any automotive parts represented in this video. You are using the information in this video solely at your own risk.