http://enfigcarstereo.com/RADIO_AUDI_A4_02.html See the link above to purchase all the items in this video.
http://enfigcarstereo.com/RADIO_AUDI_A4_02.html See the link above to purchase all the items in this video.
You must be logged in to post a comment.
Dude you are a PRO!
I have a 2004 S4 with the symphony 2 stereo and bose speakers. Which wire
set up would I need to maintain steering wheel controls and bose speaker
control I am going to use a Pioneer AVH-X1500 DVD. I’m looking for the
simple install you just did
This may have been asked already but which facia was used at 17:53? I am
looking for this in the UK but not having much luck. It just makes the car
look more OE than aftermarket IMO. Thanks
Would a 2002 Lexus is300 support the Pioneer AVIC-X940BT? If so would you
be able to do it?
Christian@enfig.com
I meant always use the screws that come with the Pioneer radio. Our kits
come with the side brackets and the screws in a separate bag. You will need
the side brackets to install the radio. Call us if you didn’t receive them.
It depends on what Kenwood radio. If you email me I can respond with that
you need. Christian@enfig.com
They easily fold back with with a screwdriver.
Since I cannot post links on here could you email the question to
info@enfig.com
Hi, just a question. So, if I buy exactly what you list in the beginning of
the video, i can do the same install on an 06 audi a4 base?
this whole video was great and very informative! but at the end lol i
started looking around cuz i thought i dropped change haha….
Not sure what parts I need exactly for mine? Just replacing the stock with
a Kenwood Double Din and eventually adding my subwoofer/amp down the line
then after that replacing the speakers in the car
It can be done but its a custom job because it requires some cutting. Call
us up for more info. 201-490-5015
what adapter/harness do i need for a 2004 audi a4 symphony 2 radio?
Pretty much any one.
I am a little backed up with E-mail because I took a few days off to go to
CES. I should be casught up by the end of the day today but feel free to
call me also. 201-490-5015 Christian
What other 7 inch stereos can go in a 2002-006 audi a4 1.8t
Depending on the radio you are installing.
The factory Audi radio would turn on with the car off and turn itself off
in 1 hour to prevent battery drain. Aftermarket radios do not have this
feature. If you use the Enfig SRWH the radio will turn on with the car and
turn off when you pull out the key not when you turn off the radio.
Whats your email? I’d like to see what i would purchase for a Pioneer
AVIC-z130BT install thanks
IF you bring us the car we will do it.
What do you consider a standard harness.. I need a specific part number.
It can be done but you must change some parts in the car. I do not have any
more info on this.
Have a 2011 Nissan altima would like to see an install video for this car.
I want to install a pioneer avic z140bh in my fj cruiser. Do you have the
products for this installation, and if so which ones are necessary?
i got 2005 audi 1.8t automatic and because it has single din console i had
to order 50£ double din centre frame,280£ for pioneer 2500bt,40£ for car
stereo fitting kits and 100£ for the fitting ….but it was worth it
Would the AVIC-Z150BH also follow the same install procedure for this car?
We do not have any UK resellers but the part number is RMK8-A4B67. We can
ship it directly.
Depends on if you have steering wheel controls and what radio you are
installing. I would send an email. Info@enfig.com
Se have a new part that does not do steering wheel controls. E-mail me and
I can respond with a parts list. Christian@enfig.com