Sometimes a power steering leak is mistakenly thought to be the pump. But, if the reservoir is overflowing out of the cap, the pump is probably not bad. Inst…
Sometimes a power steering leak is mistakenly thought to be the pump. But, if the reservoir is overflowing out of the cap, the pump is probably not bad. Inst…
You must be logged in to post a comment.
I have same model but u forget to flush the fluid.
I have a 1994 Integra LS and it seems the steering wheel pump may
leaks fluid onto the A/C belt and is making squeaky noise. Can I seal the
leak or do I have to get a new one. Does it leaks if the engine is off ? Is
there a good way to detect the leak ?
I think it is leaking because it is right above the A/C belt, there are the
steering wheel belt on its right and the alternator belt on its left
against the engine, and they are both dry.
Depressing video quality
Thank you very much for this information. Do you happen to know what size
the o-ring is?
OMG, you just might have saved me over $500!!
it was really a big help
thanks for doing this. Going to work on mine today.
thanks
Thanks for the video! Really really helpful
Can you get the o ring at an auto parts. And would that make the wheel hard
to turn also
Thanks
ThNks a lot u save me a lot money
you are sooo right sir….i got this problem yesturday…its works thanks
Brother, you are legit. Thanks
uhh Thank you very much. Awesome. Very helpful.
Thanks
Is it the same on the 4 cylinder?
Nice video and explanation. I think I won’t be replacing the pump after
all.
theres different types of o rings which one is this one?
just did this fix in 5 mins and it definitely fixed it! thanks for this
video >_<
I love you
is there a good way/product to clean off the fluid that had leaked?
thats the exact sound mine make when im just about out of fluid.so can i
assume my leak is on the pressure side or pump.the leak is on the very top
i think.1999 acura 3.0
I paid 50 cents and this shit worked. Thanks. Saved me from a new pump.
Took 10 min
This worked on my 2000 with a 3.0 V6. The setup is similar, a bit more
difficult to get to the bolt is all. Thanks a ton!
Thank you for your fantastic HELP! It cost me ALL of ONE DOLLAR AND
SIXTY-TWO CENTS! That was from a dealer WOW! Worked perfectly! I did have
to loosen the pump to get to that bolt but well worth the trouble! Thank
You!
This was the easiest fix ever. Thanks.
thanks for taking your time to do this, THUMBS UP! 1 person fails at this
DYI video.
@midnitesquirldog i with someone would make quality stuff again, i see it
and im 25 i work on boats you should see the bs i go through at work in
design flaws like upside down oil filters
thats a realy shitty setup that acura/ honda has whatever happend to a
direct steel line with an o ring that threads in it that never leaks ever
!!!
@midnitesquirldog BMW now uses a plastic sliding fitting with spring clips
on their clutch lines.
@sbakar one word JUNK !
Did this job today, thanks a million!!!!