Car Fix DIY Videos

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ic/1ASTE00784

This video shows you how to install an inner tie rod on your 2007-2013 Acura MDX. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa2t/1AXAA00013
• 14mm Wrench http://1aau.to/oLg/1AXAA00010
• 24mm Wrench
• 22mm Socket http://1aau.to/ok9/1AXAA00266
• Inner Tie Rod Removal Tool http://1aau.to/oax/1AXAA00062
• Locking Pliers http://1aau.to/oiw/1AXAA00139
• Pliers
• Ratchet http://1aau.to/obeU/1AXAA00016
• Torque Wrench http://1aau.to/oakW/1AXAA00044
• Gloves http://1aau.to/oyB/1AXSS00048
• Safety Glasses http://1aau.to/osR/1AXAA00343
• Wire Ties
• Floor Jack http://1aau.to/oPT/1AXAA00068
• Hammer http://1aau.to/oK5/1AXAA00091
• Pick http://1aau.to/oD2/1AXAA00037
• Rubber Mallet http://1aau.to/ofa/1AXAA00413
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.