Buy Now!
New HVAC Mode Door Actuator from 1AAuto.com https://trq.video/ia-1AHCX00487
This video shows you how to install a new TRQ blend door actuator on your 2007-2013 Acura MDX. The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle’s HVAC system. If the actuator isn’t working, then you won’t be able to control the temperature of the air coming out of the vents!
This repair was done on a 2011 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• 7mm Socket https://trq.video/ob6c-1AXAA00017
• Ratchet https://trq.video/ocAJ-1AXAA00016
• Socket Extensions https://trq.video/ocAE-1AXAA00015
• Gloves https://trq.video/obQG-1AXSS00048
• Safety Glasses
• Pick https://trq.video/oaer-1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This video saved me! I installed it in the correct orientation, but the air flow was not switching vents. Then I watched this video and realized I needed to align the back black lever. Problem solved! Thank you!
Thank you!!!!! Single mom here. I saved over $200 with your diy video!!! Whoohoo!!! THANK YOU!!!!
would this work on a 2017? or be similar?
Great Video. Clear articulation and quality. Thank you
Excellent video
Does the driver side also has its own actuator?
Great video! I fixed my vent mode issue in 30 minutes!!
The link for the rachet does not work; takes you to the same spot than the link for the '7mm…….."
@TRQ I just followed the procedure you had here but mine still isn't working with a new actuator. Do I need to disconnect and reconnect the battery for it to work? I noticed on your video that it's asking for your code so it looks like the battery was disconnected but I didn't see that step in your video.
More 2nd gen mdx videos please!
Literally did this and the left temp control actuator 10 mins ago with your help. Thank you! Its a lot smaller work area than you made it look like haha.