Car Fix DIY Videos

Driver Side 76622-SMA-004
https://amzn.to/4oart0r

Passenger Side 76622-SZT-G01
https://amzn.to/4nLO8Aq

Rear 76622-TZ5-A01
https://amzn.to/42UgGPZ

# How to Install OEM Front Wiper Blade Insert on 2014-2020 Acura MDX | DIY Tutorial

This step-by-step DIY tutorial shows you how to replace the front windshield wiper blade insert on a 2014–2020 Acura MDX using the OEM blade insert. No special tools required—just the replacement kit and a few quick steps. Perfect for a clean, smooth wipe and better visibility in rain.

What you’ll learn
– Identify the correct OEM wiper blade insert for MDX (2014–2020)
– Safely remove the old blade insert
– Install the new OEM insert with proper alignment

Tools and materials
– OEM front wiper blade insert kit for MDX (2014–2020)
– Optional: small flat-head screwdriver

Step-by-step guide
1. Park and power down the vehicle. Lift the affected wiper arm away from the windshield to a comfortable working angle.
2. Locate the release mechanism on the old blade insert and gently release it from the wiper bladeChannel.
3. Remove the old insert from the wiper blade housing, being careful not to damage the blade arm.
4. Compare the new OEM insert to ensure correct fit and orientation. Align the insert with the blade’s channels and adapters.
5. Slide or click the new insert into place until you hear/feel a secure engagement.
6. Lower the wiper arm back onto the windshield and repeat for the other side if needed.
7. Test the wipers on a dry surface, then with a small amount of water to confirm a clean sweep.
8. Dispose of the old insert properly and wipe down the windshield.

Pro tips
– Handle the wiper arm gently to avoid bending or breaking it.
– If the new insert doesn’t click in easily, double-check alignment and try again—force can damage the locking mechanism.
– Regularly inspect wiper blades for cracking or hard spots; replace inserts before they streak.

Safety and maintenance notes
– Do not let the wiper arm snap back onto the windshield; use slow, controlled motion.
– Use OEM parts for best fit and performance, especially on sensitive or curved windshields.
– Check blade performance in light rain to ensure even contact across the blade.

– If you found this video helpful, please like, subscribe, and share with friends who might benefit.
– Check out our other MDX maintenance videos for more DIY tutorials.
– Comment below if your model year or blade type required a slightly different approach.

Disclaimer
– This video provides general guidance. Always follow the specific instructions included with your OEM replacement kit and consult your vehicle manual if in doubt.

Tags
—–
Acura MDX wiper blade insert, 2014 MDX wiper insert, 2015 MDX wiper blade, 2016 MDX wiper insert, 2017 MDX wiper blade install, 2018 MDX wiper blade insert, 2019 MDX wiper replacement, 2020 MDX wiper blade, MDX OEM blade insert, windshield wiper insert MDX, wiper blade replacement tutorial, DIY car maintenance, auto repair tutorial, how to replace wiper blades, Acura MDX maintenance, front wiper blade install, wiper blade insert kit, MDX windshield wipers, car maintenance DIY, auto DIY MDX, wiper blade replacement tips