If you jack up from under the brake disc to relieve the tension the lower
strut bolt comes out without pounding it. Just incase so you don’t have to
worry about smashing threads or anything
did you had to install camber kit front and rear, or just rear, also did
you have any other inconvenience, whats the brand and part number, thank
you, im looking to install these in my 8th accord.
I bought this suspension to raise my ride height. My rear is set to maximum
ride height and it is about 1/2in. lower then when I started with the KYBs
& Tein lowering springs. I could ether use a strut spacer or lose the
factory preload setting and adjust it higher like you would on normal coil
overs.
Yeah thats what i heard but also just to let u know if u do want to raise
it more, f&f on their website sells longer rear lower strut mounts for like
$25 a piece if u were looking to make it alil bit higher, i might do that
since i dont want my rear to be on the ground since mines a 4 door, but
thanks for your opinion i might just go and grab me a set for mine. And
continue making videos, you have helped me alot on jobs i wouldnt think it
was possible for me to do myself, thanks again
){kind=link}
If you jack up from under the brake disc to relieve the tension the lower
strut bolt comes out without pounding it. Just incase so you don’t have to
worry about smashing threads or anything
did you had to install camber kit front and rear, or just rear, also did
you have any other inconvenience, whats the brand and part number, thank
you, im looking to install these in my 8th accord.
You gave me confidence to attempt this myself, thanks man. They will be
arrived sometime this week
New how to video.
1320 performance Elk Grove CA around $600
I bought this suspension to raise my ride height. My rear is set to maximum
ride height and it is about 1/2in. lower then when I started with the KYBs
& Tein lowering springs. I could ether use a strut spacer or lose the
factory preload setting and adjust it higher like you would on normal coil
overs.
Where and how much did you buy them for? 🙂
Ive heard the rear sits really low even with the rear extended all the way,
is that true? Im looking at these for my db1 4door
Yeah thats what i heard but also just to let u know if u do want to raise
it more, f&f on their website sells longer rear lower strut mounts for like
$25 a piece if u were looking to make it alil bit higher, i might do that
since i dont want my rear to be on the ground since mines a 4 door, but
thanks for your opinion i might just go and grab me a set for mine. And
continue making videos, you have helped me alot on jobs i wouldnt think it
was possible for me to do myself, thanks again
Rides like a new car, stiff but not bumpy. They don’t bottom out over bumps
or pot holes like my old stuff did.
Hows the ride quality on them in your opinion?