The link for the item we used will be below $90 with 1 year warranty.
also this was done on 04-08 Acura TSX
LED Low beam: http://www.socalaccessories.com/d2r-d2s-led-kit-pair/
⚠ DISCLAIMER: While SoCal Accessories would like to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. SoCal Accessories is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Thanks! Great video, I need to do my 2010 TSX, I'm pretty sure it's extremely similar. I've already replaced a ballast once. I'll report back after trying. One thing you might add to your process is running the wire thru the headlight cap before crimping connectors on. Then you could drill a smaller hole and seal it up much easier with just a dab of something.
For the plug & plug kit you guys sell for $100. Are you able to tuck everything inside the housing so that the dust cover could be used?
So you don’t need a ballast to run the led ? I’m so confused lol what did you rewire ?
For the plug and play kit you guys sell online, does it matter if the OEM is D2S or D2R? I have an 03 Acura TL.
Led in a projector is trash
May i know what led type you have used, or I missed the led type in video?
Thanks
So do these LED’s need a resistor of some sort? Last thing i wanna do is mess up the entire headlight harness because of the power output of the LED’s
if its wedging itself back out couldnt you just electrical tape it in a way it couldnt
back out? instead of going thru all that and t tapping it?
Hi i have a 2008 acura tl base which led bulbs size would i need for low and high beam?
when i did mine (last week) i didnt have to do all of that. all i had to do was put the led bulbs in and was able to use the -/+ pin from the bulb and just put them right into the connector -/+ and that was it.
I have an 04 tsx. The previous owner already converted to a LED Lasfit D2S. I bought the correct bulbs and installed them. For some reason the lights will just shut off after 5 minutes. The next day they come back on but will shut off after a few minutes. Any feedback would greatly be appreciated.
It works for Acura TL 05 also?
Did you bypass the ballast?
Don't see too much of the difference
Is ballast no longer needed during the conversion?
So i want to buy a d2s led bulb but i cant seem to find any blue ones anywhere? Do you know somewhere that makes them?
What led number did you use for the Acura tsx
would this work for a 2007 acura tl?
Maaaan, thank you so much for this video have been searching hi and low for a detailed video on how to do this, GREAT CONTENT!
I want to do this to my 2006 Infiniti M35 & my 2008 Infiniti M35
Dosent the led have little fans that need airflow to keep things cool?
Is all this worth it?? I mean HIDs are sufficient
What temp are theses rated at? In terms of Kelvin? Excited these are available as I’m a bit disappointed on my HIDs now
tsx auto led hid headlights conversion
Witch two wires are u stripping? Is that the ballast plug???
How do I order this exact set up?