hot temp causes the solder points to become separated in the relay, you need to resolder them just like in this video! message me if you have questions. than…
hot temp causes the solder points to become separated in the relay, you need to resolder them just like in this video! message me if you have questions. than…
You must be logged in to post a comment.
){kind=link}
Thanks, this saved me ~$300! I eventually figured it out from another video, but I wish you’d shown a BEFORE and after of the circuit board vs. just what it looked like after you soldered it.
@510MyTube yeah you do
did you have to remove the old solder before applying the new solder?
I took my 94 Prelude main relay out today and behold… I found 3 cracks on it! No wonder it wont start, but cracking often.
a relay, like a fuse, can always go bad so yes maybe…
can the relay still need to be replaced if it dosent look like it needs to be solder?
my 02 cl wont start. it cranks but it wont start. im gonna try to remove the relay now..
Thank you so much! You saved me a lot of money 🙂
Well the solder points become weak or separated in hot weather, so if your car doesn’t start in hot weather and just cranks over and over, it probably is that.
What was the symptoms that lead you to believe that was the problem.. I fear that I am having the same problem. Please help!