2013 – 2018 Acura ILX – How To Replace Front Brake Pads – DIY

2013 – 2018 Acura ILX – How To Replace Front Brake Pads – DIY

Tools: 19mm socket and breaker bar to remove wheel lug nuts, 19mm combination wrench, 14mm combination wrench or socket, torque wrench, floor jack and jack stands.

It is time for new brake pads on your car, and you want to do it yourself.
2013 – 2018 Acura ILX. This is front brake pads replacement DIY. Hope this video is helpful, clear and easy to follow.
***Please read your service manual and owner manual for cautions, safety, and instruction to raise the vehicle, remove the wheels safety and service torque specs for your specific vehicle!
– When the work done, Test drive the vehicle slowly and apply the brake to make sure the vehicle stop safety.

Please, work safety and responsible.
– This is DIY instruction. Perform it at your own risk. Please note that I hold NO responsibility for any damages or incidents of the work!
– Thank you for watching. Hope this is helpful for you!
– If you have any question or comment, I will get it answered to my best knowledge!

This DIY video is for demonstration purposes only. Do the work at your own risk. I do not hold any responsibility for any damages or incident during the work.
Thank you for watching.

Disclaimer of Liability (No Responsibility): Due to factors beyond the control of Huu-AcuraTlx24. Please exercise due diligence with information obtained from this video. The information contained in this video is for entertainment purpose and should only be treated as such. I/Huu – AcuraTlx24 assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. You will use such information at your own risk. Due to factors beyond the control of Huu – AcuraTlx24, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Huu – AcuraTlx24 recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Huu – AcuraTlx24.



Ramz_ says:

Do you know what the Torque requirements are on acura ilx 2013 for caliper bolts both?

M J says:

Are there any electronic wear sensors on the 2017 ILX A-Spec?

Sunfizz Inc. says:

19 mm wrench or 14 mm wrench to break the ball loose?

Jamo says:

Thank God you helped me and my friend. Holy shit your the only person thats shown us how to do something

ChristianDagum says:

do you need to bleed the brake line in order to flush the piston back?

Adam Chirico says:

This video was awesome , I had to rewind it while doing many many times and watched a few videos before this but it was a great video

sanitary103 says:

do you know the exact torque specs for Acura 2017 ilx brake caliper as well as brake caliper bracket to bolt? or do you just go by feel?

Comments are disabled for this post.