This is a quick demo on how to install new 10W PW24W PWY24W LED turn signal light bulbs on an Audi A4.
These LED bulbs are also compatible with Mercedes, BMW, Volkswagen, and more.
Check it out here: http://store.ijdmtoy.com/PWY24W-LED-Bulbs-For-Turn-Signal-or-DRL-Lights-p/40-014.htm
Man this chick has no idea what’s going on, next she’ll be replacing the blinker fluid…
complete joke – no idea what they are selling and no discussion on bulb out warning
Turn signal leds will always have hyper flash unless the car is like a 1999 and older (usually). So there are 2 ways to avoid hyper flash. You can install resistors – but make sure you wire them in correctly – but the issue with those is that they got HOT, so they MUST be mounted to some part of the engine bay. The real TRUE way to no get hyper flash is to spend the money and buy LED bulbs that have built in resistors – usually by a company called Festoon (I use them for all of my bulbs always 100%). They are usually $40 for a single pair, but if you're going to do something – DO IT RIGHT!!!
it's illegal to use white bulb as turn signal
And then end up failing safety inspection because turn signal indicators are supposed to be amber. That and you will most likely have a bulb fault due to the LED not loading the system like a standard bulb does.
How do we replace the drl lights
Thw white led is for reverse lights lmao im dead XD, they messed up
My video did it better
Very bad idea
So what is the part# for this bulb and you have it in red? And do I need to get a load resistor also? Its for a 2016 Audi S4
How to change the difficult side. Also, dim bulbs!?!?