Products used in this video (affiliate links below):
1. Sport Chrono: https://bit.ly/3tpSYqC
2. Sport Chrono Bezel: https://bit.ly/3bPmyjf
3. Wiring Harness (you need 1): https://bit.ly/2OUk6Px
4. Center cover retainer nuts (you need 2): https://bit.ly/3eEghJ3
5. Trim Removal Tool: https://geni.us/rBvpc6 (Amazon)
6. Torx screw driver set: https://geni.us/Rk6GOSa (Amazon)
7. Wire Spool: https://geni.us/jWpKDmb (Amazon)
8. Posi Taps: https://geni.us/VomIQF (Amazon)
9. Posi Locks: https://geni.us/ORIj (Amazon)
10. Wire Stripper: https://geni.us/Fase (Amazon)
11. Masking Tape: https://geni.us/kmPkm (Amazon)
12. Utility Knife: https://geni.us/TPF3bni (Amazon)
13. Utility Knife Blades: https://geni.us/ULM5co (Amazon)
Other:
Radar Detector Hardwire: https://youtu.be/UAeSJraK5nA
Save 12% on BlendMount!!: http://blendmount.refr.cc/tomaszl
Get it here and use the above coupon code: https://blendmount.com
Where can I get this chrono clock?
Thanks for the video Tommy. I have a cayman with SC and I need to remove the clock to fix the broken clock hands. Do you think I can remove the clock by just removing the vents without taking out the pcm? Can I access the clock screw through the vent openings?
Thanks
Looks awesome – I think I'm doing it!
Did you ever code it for Rev matching? That's the feature I'm most interested in.
The items you called 'receivers for screws' are called 'speed nuts.' Great video.
Great vid , did you ever manage to get the Rev matching working ?
pretty cool!
Fascinated to see how the coding for the Sport Chrono functions is done. Is it possible to enable the Sport Chrono gear shift assist and g-force displays as well as the rev matching functionality that you mention? Very useful video, thanks.
Tommy, can I get a template?
Great video. The 718 chrono clock fits to 981? And the 991 chrono clock fits 981? Because i found a cheap chrono for 991 but im not sure if works in my 981.
Hi Tommy, how did you get on with programming the sport chrono functions with the Rev matching feature?
I don’t have this car but I did this similar kind of mod in my f30. I wanted the drivers glove box or cubby hole. The same one you probably have in your f80 under the light switch. I cut it in with a blade the same way. Nice job.
Excellent videos!! Question – Do you know if the Clock has to come from another Cayman or can it be from another model? Thanks.
Nice job but did you get the rev-matching coded in the end ? When I ordered my 981, the only reason for me to get the SC package were the dynamic driveline mounts, the sport plus mode and the rev-matching feature that also came with it.
Nice job but did you get the rev-matching coded in the end ? When I ordered my 981, the only reason for me to get the SC package were the dynamic driveline mounts, the sport plus mode and the rev-matching feature that also came with it.
Amazing retrofit ! Thank you for the sharing. Do you still plan to code the auto-rev matching feature ? Do you plan to put an LSD on it too ?
great vid and superb job, i want to swap the dial colour on my chrono so will use your instructions to remove radio and vents. hopefully wont be too hard
Warranty successfully voided 😉 Is there a good place behind those side panels of the centre console to hide a GPS tracker? It could be too obvious though…
This is amazing!
You know anyone who has replaced the simple AC unit with an automatic climate control unit? Considering doing that to my 718?
Sports chrono requires no coding? Just plug and play?
Can you document the programming for it?
Nice job man!
Nobody does it like you tommy
I'm gonna pause right here and go back a few episodes I didn't even know timmy bought a Porsche smh..
wow, nice job. this is impressive!
Good job Tommy!