How to install a short ram air intake on an Acura Integra. This video walks through the steps required to remove the old air filter and tubing and install the short ram air intake. The particular…
How to install a short ram air intake on an Acura Integra. This video walks through the steps required to remove the old air filter and tubing and install the short ram air intake. The particular…
You must be logged in to post a comment.
How to install a short ram air intake! #DIY #intake #rice
Why would anyone want A hot air intake. lol
Just a quick note, a cold are intake or CAI won’t have any benefits if you
have a turbocharged engine. The turbo will compress the inlet air which
causes it to heat up, the intercooler will cool it down again. I know that
in theory it is always beter to have colder air in the first place, but in
practice the difference is negligible.
Are you going to put a heat shield around the intake
GS stands for?
Quick question. Were all these little clamps provided already? Or did you
need to get them?
Do how to test and change your oil
What’s the difference between stock and aftermarket Throttle body ?
you should get a new intake manifold and throttle body at some time.
I hope it kills your engine
wish my cai was that easy to install, took me like 40 minutes
What is that goo on your battery terminals?
why does your ABS box has 8 lines?, i count 4 for each wheel and one from
the brake fluid reservoir, the 3 othes?.
could be cool if you made a detailed ABS video showing how each part
connects on a real car, not everyone knows how the ABS pump interacts and
connects with “normal” brake lines from the master cylinder (and if it uses
a 3-way check valve how it does to return the fluid so that the bake
calliper retracts)
Short ram? Its literally in the exact same spot as the stock one lol, i
guarantee it wont make a difference other than a slight weight reduction,
just a cosmetic upgrade…
try cold air intake?
You can remove the plastic junk that is in front of the stock air filter it
is no longer needed.
thing about this is the engine now breaths in hot air because its rite next
to the exhaust lines whats the maths in that ?
@Enginerring Explained does the wiring you originally took off go anywhere
now?
How would this improve perfomance, except for the saved weight?
I suppose it will make for a slightly lower resistance for pulling air into
the engine?
with an SRI you will feel more top end . with a CAI you’ll gain more
torque. The longer the pipe the more torque you get.
What do you do with the connector where do you plug it in or leave it lose?
Never heard it called a worm clamp, that’s new to me. Anyways good video.
Please try posting the results as soon as possible.
Why you didnt go for the plastic tube? i heard its better to keep the air
intake temp lower, is that true?
looks good!
gunna be sweet to see if the performance improves
I have heard that with an after market air intake filter you have differend
exsaust sound..is this true?
Woot woot Integra
Project race car is back on track! Great video :)
No noise comparison? that’s probably the most noticeable difference xD.
That is not a true ram air intake!
Results?
Edit: NVM… I see that they’re soon to come.
Be sure to factor in the difference in noise. Maybe overlay some audio
clips in the video.
At idle that tube is going to suck very hot air………
You forgot the last step! You have to put a “RICER” sticker on your front
bumper! :p
Vtec yo?
Hot air intake 😀 Are you gonna build an airbox for that ?
Can’t wait to see the results! I’m excited lol
Good video man, I’m excited to see the rest of the build!
Damn man, I can’t wait for the testing and etc.
Your channel is going so great, well done!
Thats not a short ram thats a hot air intake.
What difference does a short ram make over the stock intake? They look
pretty much the same length lol unless I’m missing something within the
meaning.
good choice on the intake as well!
Cant wait for the CAI and comparison! Break out a dyno!
All these “hot air intake” comments are baseless…. At a stop it’s true
that the intake will suck in hot air from the engine bay, but as soon as
the car is moving, the underhood temp should drop and the intake will suck
in cooler air
Same brand (AEM)
Is it louder? I wanna hear the difference.
Too much hot air!!! … install a carbon housing around the filter with a
cold air intake from the front bumper. Plastic intake pipe would be better
for intake temperature. Search for Fabia S2000 engine …this is the best
engine build for a non-turbocharged car.
It’s funny I just installed my AEM intake on my RSX.
Is it Illegal to have a Cold Air Intake in California?