To purchase on amazon Click here ( https://www.amazon.com/dp/B06WVDHJBC )
To purchase on E Bay Click here
http://www.ebay.com/itm/272661527949?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
These come with a one year warranty….
Made and imported from Germany.
Replacement Side view mirror rubber seal trim, gasket that comes without mirror assembly fits Mercedes E class w211 years 2003, 2004, 2005, 2006 , models, E320, E350, E500, E55
A note (Dont buy the junk from china or Taiwan)
){kind=link}
Film się przydał.
Dzięki
Pozdro
I need to replace my whole passenger side assembly. If I buy a used unit can I use the same process to reinstall or do I need to remove the housing unit and install it separately. Does this make sense?
Worked like a charm.. Future reference. Use the long screw driver to open up your existing hose on new gasket..screws will love you! Nice vide both sides done in 35 mins
VERY EDUCATIVE. tHANK YOU REGARDS
Bs bro that spring is not easy like that i know from experiance
How you put the spring back in you took it off
You make it look easy not that easy man
What size Allen key do you need to remove the mirror. Excellent video
This guy goes ahead a lot, but I like it. Nice work
Thanks for posting
EXCELLENT~~~!!!
On the w211 up tp 2006 (I have a 2006 E320 CDI) there are several different types of anti theft screws in use. On mine, even though I have the torx with the center hole I was quickly disappointed because Mercedes was apparently using 5 star torx screws. But they are available on ebay and Amazon…its just buying ANOTHER doohicky that you will rarely use again afterwards,
Which tool did you use to remove the screws ? I’m not able to find it.
excellent video! thanks for posting. This is an annoying issue I've had for years and I am finally going to fix it.
No didn't help i can't do that move at 0:44 because is very hard and I don't want to break it. Please help
Thank you so much for this one
Thank you for this video. Other than my Homeresque hunt for a TS20 bit, the work went off without a hitch thanks to your instruction. My 06 E55 AMG thanks you!!
Very informative and clear. Thank you and i wish all instruction videos are like it.
Simple and easy fix. Make sure the area where the gasket is in contact with the body gets cleaned well before the new gasket is installed. Much appreciated guideline
I have a 98 E320 and need to replace both gaskets as well as adjust the spring on the passenger side. Do you have any recommendations?
Great video. I just did this on mine. One tip I can give for people: Instead of cutting the hole on new gaskets to get the wire harnesses through, you can use needle nose pliers and open them inside the hole to expand it and slide the wire harnesses through. It's easy if you can set the pliers open on something to keep outward pressure or have an assistant.
Bought both of mine for less than $18 bucks! Thanks for the tutorial. Well done sir! Also, new subscriber here. As an owner of now a W211, a W140 and a C140, I look forward to future videos! Keep up the good work!