How to Replace Rear Wheel Bearing 2007-12 Volvo S40

How to Replace Rear Wheel Bearing 2007-12 Volvo S40

Buy Now!
New Wheel Bearing & Hub Assembly from

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2007-12 Volvo S40.

• Check here for more videos on the 2004-2012 Volvo S40:

This process should be similar on the following vehicles:
2004 Volvo S40
2005 Volvo S40
2006 Volvo S40
2007 Volvo S40
2008 Volvo S40
2009 Volvo S40
2010 Volvo S40
2011 Volvo S40

Tools you will need:
• Flat Blade Screwdriver
• Pry Bar
• 3/8 Inch Air Impact Gun
• Ratchet
• Socket Driver
• Socket Extensions
• Swivel
• Torque Wrench
• Rust Penetrant
• Floor Jack
• Hammer
• Jack Stands
• Wheel Chocks
• Wire Brush


Check out our playlist:
Volvo S40 2004-2012 2nd Generation:

While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

Watch the Video

Buy The Part at 1A Auto

Do it Yourself

Save Money

Miah MARIE says:

The only thing holding that car together is that new hub

Zach M says:

All the rust makes this video feel like home.

Jonerey E. says:

FedEx dropped your TRQ wheel hub bearing kit for 12' S60 T5. What's the torque specs for the hub bearing bolts?

Catharina Carroll says:

☆i expect if it was your private car you would have replaced the dust cover ☆ i'm going to give it a go DIY today. Wish me luck.

Comments are disabled for this post.