2010 Volvo V50 Install Apple carplay android auto bypassed amplifier subwoofer modified dashboard

2010 Volvo V50 Install Apple carplay android auto bypassed amplifier subwoofer modified dashboard

2010 Volvo V50, to remove the factory radio, remove silver trim and panel next to the E brake remove 2 torx screws #25. Remove the panel on the radio, pry out the display, and remove 2 torx screws . Pull out the radio little and remove the plug on the bottom side of the radio. Pull out the radio and disconnect all plugs. Disassemble the display module and separate the PC board tape the PC board and hide under part of the radio. The amplifier is located on the driver side trunk. Unplug the harness and connect all speaker wires and run up to the radio. Wire up the speaker wires to the new radio . Ignition wire can be found at the cigarette lighter plug, and the battery wire is at the radio plug .cut abs plastic to cover the hole
I had to modify the silver trim to make the radio to sit flush with metal sleeve .Boss Audio BE9ACP.WX 9″ wireless with SXM • Apple CarPlay® & Android Auto™ (Wired, Wireless)
It is detachable radio
Fiberoptic bypass loop link
https://a.co/d/hGIGto7

189
Like
Save


Comments

@dsandjnahn4535 says:

great work. i didn't thing it was possible great work

Comments are disabled for this post.