Car Fix DIY Videos

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-243-cq

This video shows you how to install new spark plugs on your 2006-2012 Toyota RAV4. Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.

Estimated installation time for a professional technician is approximately: 54 minutes

This repair was done on a 2010 Toyota RAV4 Limited 3.5L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2006 Toyota RAV4
2007 Toyota RAV4
2008 Toyota RAV4
2009 Toyota RAV4
2010 Toyota RAV4
2011 Toyota RAV4
2012 Toyota RAV4

Tools you will need:
• 10mm Socket https://trq.video/ob3v-1AXAA00017
• 12mm Socket https://trq.video/ocxm-1AXAA00015
• Ratchet https://trq.video/ocw9-1AXAA00016
• Socket Extensions https://trq.video/ocxm-1AXAA00015
• Dielectric Grease
• Gloves https://trq.video/obKU-1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.