Car Fix DIY Videos

@DONTCALLMETHAT says:

All you need is A hammer, a Neodymium magnets inside a socket of equal size to the retainer. Give it a medium heavy whack on the socket and you're done. The magnet inside the socket will pick up the keepers faster than you can blink

@tdem1931 says:

hi i did a valve adjustment wrong, not on the comrpession stroke and its been ticking for 300 miles driven, scooter gy6, now with the valves correctly adjusted, it goes 10mph slower, any idea on what could have gone wrong. I think the valves were touching the head and maybe not good spring anymore?

@mafosa8519 says:

That tool is still usable.
Take a long shank screw the same size diameter.
Cut it to the same thickness of the wrench. Press fit it with red loctite.
Put it back in your son’s tool box!

@michaelvd2467 says:

stripping threads speedrun

@eldianmolina4920 says:

Was air in the spark plug used here

@Danielcruz6123 says:

Will a stuck valve spring cause tick noise? I changed the lifters already

@itsalldhfromhere says:

struggling with something similar right now – going to see if something like this will work for me.

@redForever1776 says:

is there amazon link to purchase ?

@LilTrish1111 says:

Does this work without having 40 psi air?

@chriswheeler5150 says:

And only stripped the threads out of one of them.